Ways to Contribute#

This document aims to give an overview of the ways to contribute to SciPy. It tries to answer commonly asked questions and provide some insight into how the community process works in practice. Readers who are familiar with the SciPy community and are experienced Python coders may want to jump straight to the SciPy contributor guide.

There are a lot of ways you can contribute:

  • Contributing new code

  • Fixing bugs, improving documentation, and other maintenance work

  • Reviewing open pull requests

  • Triaging issues

  • Working on the scipy.org website

  • Answering questions and participating on the forum.

Contributing new code#

If you have been working with the scientific Python toolstack for a while, you probably have some code lying around of which you think “this could be useful for others too”. Perhaps it’s a good idea then to contribute it to SciPy or another open source project. The first question to ask is then, where does this code belong? That question is hard to answer here, so we start with a more specific one: what code is suitable for putting into SciPy? Almost all of the new code added to SciPy has in common that it’s potentially useful in multiple scientific domains and it fits in the scope of existing SciPy subpackages (see Deciding on new features). In principle, new subpackages can be added too, but this is far less common. For code that is specific to a single application, there may be an existing project that can use the code. Some SciKits (scikit-learn, scikit-image, statsmodels, etc.) are good examples here; they have a narrower focus and because of that more domain-specific code than SciPy.

Now if you have code that you would like to see included in SciPy, how do you go about it? After checking that your code can be distributed in SciPy under a compatible license (see License Considerations), the first step is to discuss it on the scipy-dev forum. All new features, as well as changes to existing code, are discussed and decided on there. You can, and probably should already start this discussion before your code is finished. Remember that in order to be added to SciPy your code will need to be reviewed by someone else, so try to find someone willing to review your work while you’re at it.

Assuming the outcome of the discussion on the forum is positive and you have a function or piece of code that does what you need it to do, what next? Before code is added to SciPy, it at least has to have good documentation, unit tests, benchmarks, and correct code style.

  1. Unit tests

    In principle, you should aim to create unit tests that exercise all the code that you are adding. This gives some degree of confidence that your code runs correctly, also on Python versions and hardware or OSes that you don’t have available yourself. An extensive description of how to write unit tests is given in Testing guidelines, and Running SciPy Tests Locally documents how to run them.

  2. Benchmarks

    Unit tests check for correct functionality; benchmarks measure code performance. Not all existing SciPy code has benchmarks, but it should: as SciPy grows it is increasingly important to monitor execution times in order to catch unexpected regressions. More information about writing and running benchmarks is available in Benchmarking SciPy with airspeed velocity.

  3. Documentation

    Clear and complete documentation is essential in order for users to be able to find and understand the code. Documentation for individual functions and classes – which includes at least a basic description, type and meaning of all parameters and returns values, and usage examples in doctest format – is put in docstrings. Those docstrings can be read within the interpreter, and are compiled into a reference guide in HTML and pdf format. Higher-level documentation for key (areas of) functionality is provided in tutorial format and/or in module docstrings. A guide on how to write documentation is given in Documentation style, and Rendering documentation locally with Sphinx explains how to preview the documentation as it will appear online.

  4. Code style

    Uniform code style makes it easier for others to read your code. SciPy follows the standard Python style guideline, PEP8, with the exception that the recommended maximum line length is 88 characters, rather than PEP8’s 79 characters.

    We provide a git pre-commit hook that can check each of your commits for proper style. Install it (once) by running the following from the root of the SciPy repository:

    cp tools/pre-commit-hook.py .git/hooks/pre-commit

    Alternatively, you may run the linter manually:

    python dev.py lint

    Most IDEs and text editors also have settings that can help you follow PEP8, for example by translating tabs by four spaces. More information is available in PEP8 and SciPy.

A checklist, including these and other requirements, is available at the end of the example Development workflow.

Another question you may have is: where exactly do I put my code? To answer this, it is useful to understand how the SciPy public API (application programming interface) is defined. For most modules, the API is two levels deep, which means your new function should appear as scipy.subpackage.my_new_func. my_new_func can be put in an existing or new file under /scipy/<subpackage>/, its name is added to the __all__ list in that file (which lists all public functions in the file), and those public functions are then imported in /scipy/<subpackage>/__init__.py. Any private functions/classes should have a leading underscore (_) in their name. A more detailed description of what the public API of SciPy is, is given in SciPy API.

Once you think your code is ready for inclusion in SciPy, you can send a pull request (PR) on Github. We won’t go into the details of how to work with git here, this is described well in Git for development and on the Github help pages. When you send the PR for a new feature, be sure to also mention this on the scipy-dev forum. This can prompt interested people to help review your PR. Assuming that you already got positive feedback before on the general idea of your code/feature, the purpose of the code review is to ensure that the code is correct, efficient and meets the requirements outlined above. In many cases, the code review happens relatively quickly, but it’s possible that it stalls. If you have addressed all feedback already given, it’s perfectly fine to ask on the forum again for review (after a reasonable amount of time, say a couple of weeks, has passed). Once the review is completed, the PR is merged into the “main” branch of SciPy.

The above describes the requirements and process for adding code to SciPy. It doesn’t yet answer the question though how decisions are made exactly. The basic answer is: decisions are made by consensus, by everyone who chooses to participate in the discussion on the forum. This includes developers, other users and yourself. Aiming for consensus in the discussion is important – SciPy is a project by and for the scientific Python community. In those rare cases that agreement cannot be reached, the maintainers of the module in question can decide the issue.

License Considerations#

I based my code on existing Matlab/R/… code I found online, is this OK?

It depends. SciPy is distributed under a BSD license, so if the code that you based your code on is also BSD licensed or has a BSD-compatible license (e.g. MIT, PSF) then it’s OK. Code which is GPL or Apache licensed, has no clear license, requires citation or is free for academic use only can’t be included in SciPy. Therefore if you copied existing code with such a license or made a direct translation to Python of it, your code can’t be included. If you’re unsure, please ask on the scipy-dev forum.

Why is SciPy under the BSD license and not, say, the GPL?

Like Python, SciPy uses a “permissive” open source license, which allows proprietary reuse. While this allows companies to use and modify the software without giving anything back, it is felt that the larger user base results in more contributions overall, and companies often publish their modifications anyway, without being required to. See John Hunter’s BSD pitch.

For more information about SciPy’s license, see Licensing.

Maintaining existing code#

The previous section talked specifically about adding new functionality to SciPy. A large part of that discussion also applies to the maintenance of existing code. Maintenance means fixing bugs, improving code quality, documenting existing functionality better, adding missing unit tests, adding performance benchmarks, keeping build scripts up-to-date, etc. The SciPy issue list contains all reported bugs, build/documentation issues, etc. Fixing issues helps improve the overall quality of SciPy, and is also a good way of getting familiar with the project. You may also want to fix a bug because you ran into it and need the function in question to work correctly.

The discussion on code style and unit testing above applies equally to bug fixes. It is usually best to start by writing a unit test that shows the problem, i.e. it should pass but doesn’t. Once you have that, you can fix the code so that the test does pass. That should be enough to send a PR for this issue. Unlike when adding new code, discussing this on the forum may not be necessary - if the old behavior of the code is clearly incorrect, no one will object to having it fixed. It may be necessary to add some warning or deprecation message for the changed behavior. This should be part of the review process.


Pull requests that only change code style, e.g. fixing some PEP8 issues in a file, are discouraged. Such PRs are often not worth cluttering the git annotate history, and take reviewer time that may be better spent in other ways. Code style cleanups of code that is touched as part of a functional change are fine however.

Reviewing pull requests#

Reviewing open pull requests (PRs) is very welcome, and a valuable way to help increase the speed at which the project moves forward. If you have specific knowledge/experience in a particular area (say “optimization algorithms” or “special functions”) then reviewing PRs in that area is especially valuable - sometimes PRs with technical code have to wait for a long time to get merged due to a shortage of appropriate reviewers.

We encourage everyone to get involved in the review process; it’s also a great way to get familiar with the code base. Reviewers should ask themselves some or all of the following questions:

  • Was this change adequately discussed (relevant for new features and changes in existing behavior)?

  • Is the feature scientifically sound? Algorithms may be known to work based on literature; otherwise, closer look at correctness is valuable.

  • Is the intended behavior clear under all conditions (e.g. unexpected inputs like empty arrays or nan/inf values)?

  • Does the code meet the quality, test and documentation expectations outlined under Contributing new code?

If we do not know you yet, consider introducing yourself.

Other ways to contribute#

There are many ways to contribute other than writing code.

Triaging issues (investigating bug reports for validity and possible actions to take) is also a useful activity. SciPy has many hundreds of open issues; closing invalid ones and correctly labelling valid ones (ideally with some first thoughts in a comment) allows prioritizing maintenance work and finding related issues easily when working on an existing function or subpackage. To read more about issue triage, see Triaging and curating issues.

Participating in discussions on the scipy-user and scipy-dev forum is a contribution in itself. Everyone who writes to those lists with a problem or an idea would like to get responses, and writing such responses makes the project and community function better and appear more welcoming.

The scipy.org website contains a lot of information on both SciPy the project and SciPy the community, and it can always use a new pair of hands. The sources for the website live in their own separate repo: scipy/scipy.org

Getting started#

Thanks for your interest in contributing to SciPy! If you’re interested in contributing code, we hope you’ll continue on to the SciPy contributor guide for details on how to set up your development environment, implement your improvements, and submit your first PR!