Array Iterator API¶
New in version 1.6.
Array Iterator¶
The array iterator encapsulates many of the key features in ufuncs, allowing user code to support features like output parameters, preservation of memory layouts, and buffering of data with the wrong alignment or type, without requiring difficult coding.
This page documents the API for the iterator. The C-API naming convention chosen is based on the one in the numpy-refactor branch, so will integrate naturally into the refactored code base. The iterator is named NpyIter and functions are named NpyIter_*.
Converting from Previous NumPy Iterators¶
The existing iterator API includes functions like PyArrayIter_Check, PyArray_Iter* and PyArray_ITER_*. The multi-iterator array includes PyArray_MultiIter*, PyArray_Broadcast, and PyArray_RemoveSmallest. The new iterator design replaces all of this functionality with a single object and associated API. One goal of the new API is that all uses of the existing iterator should be replaceable with the new iterator without significant effort. In 1.6, the major exception to this is the neighborhood iterator, which does not have corresponding features in this iterator.
Here is a conversion table for which functions to use with the new iterator:
Simple Iteration Example¶
The best way to become familiar with the iterator is to look at its usage within the NumPy codebase itself. For example, here is a slightly tweaked version of the code for PyArray_CountNonzero, which counts the number of non-zero elements in an array.
npy_intp PyArray_CountNonzero(PyArrayObject* self)
{
/* Nonzero boolean function */
PyArray_NonzeroFunc* nonzero = PyArray_DESCR(self)->f->nonzero;
NpyIter* iter;
NpyIter_IterNextFunc *iternext;
char** dataptr;
npy_intp* strideptr,* innersizeptr;
/* Handle zero-sized arrays specially */
if (PyArray_SIZE(self) == 0) {
return 0;
}
/*
* Create and use an iterator to count the nonzeros.
* flag NPY_ITER_READONLY
* - The array is never written to.
* flag NPY_ITER_EXTERNAL_LOOP
* - Inner loop is done outside the iterator for efficiency.
* flag NPY_ITER_NPY_ITER_REFS_OK
* - Reference types are acceptable.
* order NPY_KEEPORDER
* - Visit elements in memory order, regardless of strides.
* This is good for performance when the specific order
* elements are visited is unimportant.
* casting NPY_NO_CASTING
* - No casting is required for this operation.
*/
iter = NpyIter_New(self, NPY_ITER_READONLY|
NPY_ITER_EXTERNAL_LOOP|
NPY_ITER_REFS_OK,
NPY_KEEPORDER, NPY_NO_CASTING,
NULL);
if (iter == NULL) {
return -1;
}
/*
* The iternext function gets stored in a local variable
* so it can be called repeatedly in an efficient manner.
*/
iternext = NpyIter_GetIterNext(iter, NULL);
if (iternext == NULL) {
NpyIter_Deallocate(iter);
return -1;
}
/* The location of the data pointer which the iterator may update */
dataptr = NpyIter_GetDataPtrArray(iter);
/* The location of the stride which the iterator may update */
strideptr = NpyIter_GetInnerStrideArray(iter);
/* The location of the inner loop size which the iterator may update */
innersizeptr = NpyIter_GetInnerLoopSizePtr(iter);
/* The iteration loop */
do {
/* Get the inner loop data/stride/count values */
char* data = *dataptr;
npy_intp stride = *strideptr;
npy_intp count = *innersizeptr;
/* This is a typical inner loop for NPY_ITER_EXTERNAL_LOOP */
while (count--) {
if (nonzero(data, self)) {
++nonzero_count;
}
data += stride;
}
/* Increment the iterator to the next inner loop */
} while(iternext(iter));
NpyIter_Deallocate(iter);
return nonzero_count;
}
Simple Multi-Iteration Example¶
Here is a simple copy function using the iterator. The order parameter is used to control the memory layout of the allocated result, typically NPY_KEEPORDER is desired.
PyObject *CopyArray(PyObject *arr, NPY_ORDER order)
{
NpyIter *iter;
NpyIter_IterNextFunc *iternext;
PyObject *op[2], *ret;
npy_uint32 flags;
npy_uint32 op_flags[2];
npy_intp itemsize, *innersizeptr, innerstride;
char **dataptrarray;
/*
* No inner iteration - inner loop is handled by CopyArray code
*/
flags = NPY_ITER_EXTERNAL_LOOP;
/*
* Tell the constructor to automatically allocate the output.
* The data type of the output will match that of the input.
*/
op[0] = arr;
op[1] = NULL;
op_flags[0] = NPY_ITER_READONLY;
op_flags[1] = NPY_ITER_WRITEONLY | NPY_ITER_ALLOCATE;
/* Construct the iterator */
iter = NpyIter_MultiNew(2, op, flags, order, NPY_NO_CASTING,
op_flags, NULL);
if (iter == NULL) {
return NULL;
}
/*
* Make a copy of the iternext function pointer and
* a few other variables the inner loop needs.
*/
iternext = NpyIter_GetIterNext(iter);
innerstride = NpyIter_GetInnerStrideArray(iter)[0];
itemsize = NpyIter_GetDescrArray(iter)[0]->elsize;
/*
* The inner loop size and data pointers may change during the
* loop, so just cache the addresses.
*/
innersizeptr = NpyIter_GetInnerLoopSizePtr(iter);
dataptrarray = NpyIter_GetDataPtrArray(iter);
/*
* Note that because the iterator allocated the output,
* it matches the iteration order and is packed tightly,
* so we don't need to check it like the input.
*/
if (innerstride == itemsize) {
do {
memcpy(dataptrarray[1], dataptrarray[0],
itemsize * (*innersizeptr));
} while (iternext(iter));
} else {
/* For efficiency, should specialize this based on item size... */
npy_intp i;
do {
npy_intp size = *innersizeptr;
char *src = dataaddr[0], *dst = dataaddr[1];
for(i = 0; i < size; i++, src += innerstride, dst += itemsize) {
memcpy(dst, src, itemsize);
}
} while (iternext(iter));
}
/* Get the result from the iterator object array */
ret = NpyIter_GetOperandArray(iter)[1];
Py_INCREF(ret);
if (NpyIter_Deallocate(iter) != NPY_SUCCEED) {
Py_DECREF(ret);
return NULL;
}
return ret;
}
Iterator Data Types¶
The iterator layout is an internal detail, and user code only sees an incomplete struct.
- NpyIter¶
This is an opaque pointer type for the iterator. Access to its contents can only be done through the iterator API.
- NpyIter_Type¶
This is the type which exposes the iterator to Python. Currently, no API is exposed which provides access to the values of a Python-created iterator. If an iterator is created in Python, it must be used in Python and vice versa. Such an API will likely be created in a future version.
- NpyIter_IterNextFunc¶
This is a function pointer for the iteration loop, returned by NpyIter_GetIterNext.
- NpyIter_GetMultiIndexFunc¶
This is a function pointer for getting the current iterator multi-index, returned by NpyIter_GetGetMultiIndex.
Construction and Destruction¶
- NpyIter* NpyIter_New(PyArrayObject* op, npy_uint32 flags, NPY_ORDER order, NPY_CASTING casting, PyArray_Descr* dtype)¶
Creates an iterator for the given numpy array object op.
Flags that may be passed in flags are any combination of the global and per-operand flags documented in NpyIter_MultiNew, except for NPY_ITER_ALLOCATE.
Any of the NPY_ORDER enum values may be passed to order. For efficient iteration, NPY_KEEPORDER is the best option, and the other orders enforce the particular iteration pattern.
Any of the NPY_CASTING enum values may be passed to casting. The values include NPY_NO_CASTING, NPY_EQUIV_CASTING, NPY_SAFE_CASTING, NPY_SAME_KIND_CASTING, and NPY_UNSAFE_CASTING. To allow the casts to occur, copying or buffering must also be enabled.
If dtype isn’t NULL, then it requires that data type. If copying is allowed, it will make a temporary copy if the data is castable. If NPY_ITER_UPDATEIFCOPY is enabled, it will also copy the data back with another cast upon iterator destruction.
Returns NULL if there is an error, otherwise returns the allocated iterator.
To make an iterator similar to the old iterator, this should work.
iter = NpyIter_New(op, NPY_ITER_READWRITE, NPY_CORDER, NPY_NO_CASTING, NULL);
If you want to edit an array with aligned double code, but the order doesn’t matter, you would use this.
dtype = PyArray_DescrFromType(NPY_DOUBLE); iter = NpyIter_New(op, NPY_ITER_READWRITE| NPY_ITER_BUFFERED| NPY_ITER_NBO| NPY_ITER_ALIGNED, NPY_KEEPORDER, NPY_SAME_KIND_CASTING, dtype); Py_DECREF(dtype);
- NpyIter* NpyIter_MultiNew(npy_intp nop, PyArrayObject** op, npy_uint32 flags, NPY_ORDER order, NPY_CASTING casting, npy_uint32* op_flags, PyArray_Descr** op_dtypes)¶
Creates an iterator for broadcasting the nop array objects provided in op, using regular NumPy broadcasting rules.
Any of the NPY_ORDER enum values may be passed to order. For efficient iteration, NPY_KEEPORDER is the best option, and the other orders enforce the particular iteration pattern. When using NPY_KEEPORDER, if you also want to ensure that the iteration is not reversed along an axis, you should pass the flag NPY_ITER_DONT_NEGATE_STRIDES.
Any of the NPY_CASTING enum values may be passed to casting. The values include NPY_NO_CASTING, NPY_EQUIV_CASTING, NPY_SAFE_CASTING, NPY_SAME_KIND_CASTING, and NPY_UNSAFE_CASTING. To allow the casts to occur, copying or buffering must also be enabled.
If op_dtypes isn’t NULL, it specifies a data type or NULL for each op[i].
Returns NULL if there is an error, otherwise returns the allocated iterator.
Flags that may be passed in flags, applying to the whole iterator, are:
- NPY_ITER_C_INDEX¶
Causes the iterator to track a raveled flat index matching C order. This option cannot be used with NPY_ITER_F_INDEX.
- NPY_ITER_F_INDEX¶
Causes the iterator to track a raveled flat index matching Fortran order. This option cannot be used with NPY_ITER_C_INDEX.
- NPY_ITER_MULTI_INDEX¶
Causes the iterator to track a multi-index. This prevents the iterator from coalescing axes to produce bigger inner loops.
- NPY_ITER_EXTERNAL_LOOP¶
Causes the iterator to skip iteration of the innermost loop, requiring the user of the iterator to handle it.
This flag is incompatible with NPY_ITER_C_INDEX, NPY_ITER_F_INDEX, and NPY_ITER_MULTI_INDEX.
- NPY_ITER_DONT_NEGATE_STRIDES¶
This only affects the iterator when NPY_KEEPORDER is specified for the order parameter. By default with NPY_KEEPORDER, the iterator reverses axes which have negative strides, so that memory is traversed in a forward direction. This disables this step. Use this flag if you want to use the underlying memory-ordering of the axes, but don’t want an axis reversed. This is the behavior of numpy.ravel(a, order='K'), for instance.
- NPY_ITER_COMMON_DTYPE¶
Causes the iterator to convert all the operands to a common data type, calculated based on the ufunc type promotion rules. Copying or buffering must be enabled.
If the common data type is known ahead of time, don’t use this flag. Instead, set the requested dtype for all the operands.
- NPY_ITER_REFS_OK¶
Indicates that arrays with reference types (object arrays or structured arrays containing an object type) may be accepted and used in the iterator. If this flag is enabled, the caller must be sure to check whether :cfunc:`NpyIter_IterationNeedsAPI`(iter) is true, in which case it may not release the GIL during iteration.
- NPY_ITER_ZEROSIZE_OK¶
Indicates that arrays with a size of zero should be permitted. Since the typical iteration loop does not naturally work with zero-sized arrays, you must check that the IterSize is non-zero before entering the iteration loop.
- NPY_ITER_REDUCE_OK¶
Permits writeable operands with a dimension with zero stride and size greater than one. Note that such operands must be read/write.
When buffering is enabled, this also switches to a special buffering mode which reduces the loop length as necessary to not trample on values being reduced.
Note that if you want to do a reduction on an automatically allocated output, you must use NpyIter_GetOperandArray to get its reference, then set every value to the reduction unit before doing the iteration loop. In the case of a buffered reduction, this means you must also specify the flag NPY_ITER_DELAY_BUFALLOC, then reset the iterator after initializing the allocated operand to prepare the buffers.
- NPY_ITER_RANGED¶
Enables support for iteration of sub-ranges of the full iterindex range [0, NpyIter_IterSize(iter)). Use the function NpyIter_ResetToIterIndexRange to specify a range for iteration.
This flag can only be used with NPY_ITER_EXTERNAL_LOOP when NPY_ITER_BUFFERED is enabled. This is because without buffering, the inner loop is always the size of the innermost iteration dimension, and allowing it to get cut up would require special handling, effectively making it more like the buffered version.
- NPY_ITER_BUFFERED¶
Causes the iterator to store buffering data, and use buffering to satisfy data type, alignment, and byte-order requirements. To buffer an operand, do not specify the NPY_ITER_COPY or NPY_ITER_UPDATEIFCOPY flags, because they will override buffering. Buffering is especially useful for Python code using the iterator, allowing for larger chunks of data at once to amortize the Python interpreter overhead.
If used with NPY_ITER_EXTERNAL_LOOP, the inner loop for the caller may get larger chunks than would be possible without buffering, because of how the strides are laid out.
Note that if an operand is given the flag NPY_ITER_COPY or NPY_ITER_UPDATEIFCOPY, a copy will be made in preference to buffering. Buffering will still occur when the array was broadcast so elements need to be duplicated to get a constant stride.
In normal buffering, the size of each inner loop is equal to the buffer size, or possibly larger if NPY_ITER_GROWINNER is specified. If NPY_ITER_REDUCE_OK is enabled and a reduction occurs, the inner loops may become smaller depending on the structure of the reduction.
- NPY_ITER_GROWINNER¶
When buffering is enabled, this allows the size of the inner loop to grow when buffering isn’t necessary. This option is best used if you’re doing a straight pass through all the data, rather than anything with small cache-friendly arrays of temporary values for each inner loop.
- NPY_ITER_DELAY_BUFALLOC¶
When buffering is enabled, this delays allocation of the buffers until NpyIter_Reset or another reset function is called. This flag exists to avoid wasteful copying of buffer data when making multiple copies of a buffered iterator for multi-threaded iteration.
Another use of this flag is for setting up reduction operations. After the iterator is created, and a reduction output is allocated automatically by the iterator (be sure to use READWRITE access), its value may be initialized to the reduction unit. Use NpyIter_GetOperandArray to get the object. Then, call NpyIter_Reset to allocate and fill the buffers with their initial values.
Flags that may be passed in op_flags[i], where 0 <= i < nop:
- NPY_ITER_READWRITE¶
- NPY_ITER_READONLY¶
- NPY_ITER_WRITEONLY¶
Indicate how the user of the iterator will read or write to op[i]. Exactly one of these flags must be specified per operand.
- NPY_ITER_COPY¶
Allow a copy of op[i] to be made if it does not meet the data type or alignment requirements as specified by the constructor flags and parameters.
- NPY_ITER_UPDATEIFCOPY¶
Triggers NPY_ITER_COPY, and when an array operand is flagged for writing and is copied, causes the data in a copy to be copied back to op[i] when the iterator is destroyed.
If the operand is flagged as write-only and a copy is needed, an uninitialized temporary array will be created and then copied to back to op[i] on destruction, instead of doing the unecessary copy operation.
- NPY_ITER_NBO¶
- NPY_ITER_ALIGNED¶
- NPY_ITER_CONTIG¶
Causes the iterator to provide data for op[i] that is in native byte order, aligned according to the dtype requirements, contiguous, or any combination.
By default, the iterator produces pointers into the arrays provided, which may be aligned or unaligned, and with any byte order. If copying or buffering is not enabled and the operand data doesn’t satisfy the constraints, an error will be raised.
The contiguous constraint applies only to the inner loop, successive inner loops may have arbitrary pointer changes.
If the requested data type is in non-native byte order, the NBO flag overrides it and the requested data type is converted to be in native byte order.
- NPY_ITER_ALLOCATE¶
This is for output arrays, and requires that the flag NPY_ITER_WRITEONLY be set. If op[i] is NULL, creates a new array with the final broadcast dimensions, and a layout matching the iteration order of the iterator.
When op[i] is NULL, the requested data type op_dtypes[i] may be NULL as well, in which case it is automatically generated from the dtypes of the arrays which are flagged as readable. The rules for generating the dtype are the same is for UFuncs. Of special note is handling of byte order in the selected dtype. If there is exactly one input, the input’s dtype is used as is. Otherwise, if more than one input dtypes are combined together, the output will be in native byte order.
After being allocated with this flag, the caller may retrieve the new array by calling NpyIter_GetOperandArray and getting the i-th object in the returned C array. The caller must call Py_INCREF on it to claim a reference to the array.
- NPY_ITER_NO_SUBTYPE¶
For use with NPY_ITER_ALLOCATE, this flag disables allocating an array subtype for the output, forcing it to be a straight ndarray.
TODO: Maybe it would be better to introduce a function NpyIter_GetWrappedOutput and remove this flag?
- NPY_ITER_NO_BROADCAST¶
Ensures that the input or output matches the iteration dimensions exactly.
- NpyIter* NpyIter_AdvancedNew(npy_intp nop, PyArrayObject** op, npy_uint32 flags, NPY_ORDER order, NPY_CASTING casting, npy_uint32* op_flags, PyArray_Descr** op_dtypes, int oa_ndim, int** op_axes, npy_intp* itershape, npy_intp buffersize)¶
Extends NpyIter_MultiNew with several advanced options providing more control over broadcasting and buffering.
If 0/NULL values are passed to oa_ndim, op_axes, itershape, and buffersize, it is equivalent to NpyIter_MultiNew.
The parameter oa_ndim, when non-zero, specifies the number of dimensions that will be iterated with customized broadcasting. If it is provided, op_axes and/or itershape must also be provided. The op_axes parameter let you control in detail how the axes of the operand arrays get matched together and iterated. In op_axes, you must provide an array of nop pointers to oa_ndim-sized arrays of type npy_intp. If an entry in op_axes is NULL, normal broadcasting rules will apply. In op_axes[j][i] is stored either a valid axis of op[j], or -1 which means newaxis. Within each op_axes[j] array, axes may not be repeated. The following example is how normal broadcasting applies to a 3-D array, a 2-D array, a 1-D array and a scalar.
int oa_ndim = 3; /* # iteration axes */ int op0_axes[] = {0, 1, 2}; /* 3-D operand */ int op1_axes[] = {-1, 0, 1}; /* 2-D operand */ int op2_axes[] = {-1, -1, 0}; /* 1-D operand */ int op3_axes[] = {-1, -1, -1} /* 0-D (scalar) operand */ int* op_axes[] = {op0_axes, op1_axes, op2_axes, op3_axes};
The itershape parameter allows you to force the iterator to have a specific iteration shape. It is an array of length oa_ndim. When an entry is negative, its value is determined from the operands. This parameter allows automatically allocated outputs to get additional dimensions which don’t match up with any dimension of an input.
If buffersize is zero, a default buffer size is used, otherwise it specifies how big of a buffer to use. Buffers which are powers of 2 such as 4096 or 8192 are recommended.
Returns NULL if there is an error, otherwise returns the allocated iterator.
- NpyIter* NpyIter_Copy(NpyIter* iter)¶
Makes a copy of the given iterator. This function is provided primarily to enable multi-threaded iteration of the data.
TODO: Move this to a section about multithreaded iteration.
The recommended approach to multithreaded iteration is to first create an iterator with the flags NPY_ITER_EXTERNAL_LOOP, NPY_ITER_RANGED, NPY_ITER_BUFFERED, NPY_ITER_DELAY_BUFALLOC, and possibly NPY_ITER_GROWINNER. Create a copy of this iterator for each thread (minus one for the first iterator). Then, take the iteration index range [0, NpyIter_GetIterSize(iter)) and split it up into tasks, for example using a TBB parallel_for loop. When a thread gets a task to execute, it then uses its copy of the iterator by calling NpyIter_ResetToIterIndexRange and iterating over the full range.
When using the iterator in multi-threaded code or in code not holding the Python GIL, care must be taken to only call functions which are safe in that context. NpyIter_Copy cannot be safely called without the Python GIL, because it increments Python references. The Reset* and some other functions may be safely called by passing in the errmsg parameter as non-NULL, so that the functions will pass back errors through it instead of setting a Python exception.
- int NpyIter_RemoveAxis(NpyIter* iter, int axis)``
Removes an axis from iteration. This requires that NPY_ITER_MULTI_INDEX was set for iterator creation, and does not work if buffering is enabled or an index is being tracked. This function also resets the iterator to its initial state.
This is useful for setting up an accumulation loop, for example. The iterator can first be created with all the dimensions, including the accumulation axis, so that the output gets created correctly. Then, the accumulation axis can be removed, and the calculation done in a nested fashion.
WARNING: This function may change the internal memory layout of the iterator. Any cached functions or pointers from the iterator must be retrieved again!
Returns NPY_SUCCEED or NPY_FAIL.
- int NpyIter_RemoveMultiIndex(NpyIter* iter)¶
If the iterator is tracking a multi-index, this strips support for them, and does further iterator optimizations that are possible if multi-indices are not needed. This function also resets the iterator to its initial state.
WARNING: This function may change the internal memory layout of the iterator. Any cached functions or pointers from the iterator must be retrieved again!
After calling this function, :cfunc:`NpyIter_HasMultiIndex`(iter) will return false.
Returns NPY_SUCCEED or NPY_FAIL.
- int NpyIter_EnableExternalLoop(NpyIter* iter)¶
If NpyIter_RemoveMultiIndex was called, you may want to enable the flag NPY_ITER_EXTERNAL_LOOP. This flag is not permitted together with NPY_ITER_MULTI_INDEX, so this function is provided to enable the feature after NpyIter_RemoveMultiIndex is called. This function also resets the iterator to its initial state.
WARNING: This function changes the internal logic of the iterator. Any cached functions or pointers from the iterator must be retrieved again!
Returns NPY_SUCCEED or NPY_FAIL.
- int NpyIter_Deallocate(NpyIter* iter)¶
Deallocates the iterator object. This additionally frees any copies made, triggering UPDATEIFCOPY behavior where necessary.
Returns NPY_SUCCEED or NPY_FAIL.
- int NpyIter_Reset(NpyIter* iter, char** errmsg)¶
Resets the iterator back to its initial state, at the beginning of the iteration range.
Returns NPY_SUCCEED or NPY_FAIL. If errmsg is non-NULL, no Python exception is set when NPY_FAIL is returned. Instead, *errmsg is set to an error message. When errmsg is non-NULL, the function may be safely called without holding the Python GIL.
- int NpyIter_ResetToIterIndexRange(NpyIter* iter, npy_intp istart, npy_intp iend, char** errmsg)¶
Resets the iterator and restricts it to the iterindex range [istart, iend). See NpyIter_Copy for an explanation of how to use this for multi-threaded iteration. This requires that the flag NPY_ITER_RANGED was passed to the iterator constructor.
If you want to reset both the iterindex range and the base pointers at the same time, you can do the following to avoid extra buffer copying (be sure to add the return code error checks when you copy this code).
/* Set to a trivial empty range */ NpyIter_ResetToIterIndexRange(iter, 0, 0); /* Set the base pointers */ NpyIter_ResetBasePointers(iter, baseptrs); /* Set to the desired range */ NpyIter_ResetToIterIndexRange(iter, istart, iend);
Returns NPY_SUCCEED or NPY_FAIL. If errmsg is non-NULL, no Python exception is set when NPY_FAIL is returned. Instead, *errmsg is set to an error message. When errmsg is non-NULL, the function may be safely called without holding the Python GIL.
- int NpyIter_ResetBasePointers(NpyIter *iter, char** baseptrs, char** errmsg)¶
Resets the iterator back to its initial state, but using the values in baseptrs for the data instead of the pointers from the arrays being iterated. This functions is intended to be used, together with the op_axes parameter, by nested iteration code with two or more iterators.
Returns NPY_SUCCEED or NPY_FAIL. If errmsg is non-NULL, no Python exception is set when NPY_FAIL is returned. Instead, *errmsg is set to an error message. When errmsg is non-NULL, the function may be safely called without holding the Python GIL.
TODO: Move the following into a special section on nested iterators.
Creating iterators for nested iteration requires some care. All the iterator operands must match exactly, or the calls to NpyIter_ResetBasePointers will be invalid. This means that automatic copies and output allocation should not be used haphazardly. It is possible to still use the automatic data conversion and casting features of the iterator by creating one of the iterators with all the conversion parameters enabled, then grabbing the allocated operands with the NpyIter_GetOperandArray function and passing them into the constructors for the rest of the iterators.
WARNING: When creating iterators for nested iteration, the code must not use a dimension more than once in the different iterators. If this is done, nested iteration will produce out-of-bounds pointers during iteration.
WARNING: When creating iterators for nested iteration, buffering can only be applied to the innermost iterator. If a buffered iterator is used as the source for baseptrs, it will point into a small buffer instead of the array and the inner iteration will be invalid.
The pattern for using nested iterators is as follows.
NpyIter *iter1, *iter1; NpyIter_IterNextFunc *iternext1, *iternext2; char **dataptrs1; /* * With the exact same operands, no copies allowed, and * no axis in op_axes used both in iter1 and iter2. * Buffering may be enabled for iter2, but not for iter1. */ iter1 = ...; iter2 = ...; iternext1 = NpyIter_GetIterNext(iter1); iternext2 = NpyIter_GetIterNext(iter2); dataptrs1 = NpyIter_GetDataPtrArray(iter1); do { NpyIter_ResetBasePointers(iter2, dataptrs1); do { /* Use the iter2 values */ } while (iternext2(iter2)); } while (iternext1(iter1));
- int NpyIter_GotoMultiIndex(NpyIter* iter, npy_intp* multi_index)¶
Adjusts the iterator to point to the ndim indices pointed to by multi_index. Returns an error if a multi-index is not being tracked, the indices are out of bounds, or inner loop iteration is disabled.
Returns NPY_SUCCEED or NPY_FAIL.
- int NpyIter_GotoIndex(NpyIter* iter, npy_intp index)¶
Adjusts the iterator to point to the index specified. If the iterator was constructed with the flag NPY_ITER_C_INDEX, index is the C-order index, and if the iterator was constructed with the flag NPY_ITER_F_INDEX, index is the Fortran-order index. Returns an error if there is no index being tracked, the index is out of bounds, or inner loop iteration is disabled.
Returns NPY_SUCCEED or NPY_FAIL.
- npy_intp NpyIter_GetIterSize(NpyIter* iter)¶
Returns the number of elements being iterated. This is the product of all the dimensions in the shape.
- npy_intp NpyIter_GetIterIndex(NpyIter* iter)¶
Gets the iterindex of the iterator, which is an index matching the iteration order of the iterator.
- void NpyIter_GetIterIndexRange(NpyIter* iter, npy_intp* istart, npy_intp* iend)¶
Gets the iterindex sub-range that is being iterated. If NPY_ITER_RANGED was not specified, this always returns the range [0, NpyIter_IterSize(iter)).
- int NpyIter_GotoIterIndex(NpyIter* iter, npy_intp iterindex)¶
Adjusts the iterator to point to the iterindex specified. The IterIndex is an index matching the iteration order of the iterator. Returns an error if the iterindex is out of bounds, buffering is enabled, or inner loop iteration is disabled.
Returns NPY_SUCCEED or NPY_FAIL.
- npy_bool NpyIter_HasDelayedBufAlloc(NpyIter* iter)¶
Returns 1 if the flag NPY_ITER_DELAY_BUFALLOC was passed to the iterator constructor, and no call to one of the Reset functions has been done yet, 0 otherwise.
- npy_bool NpyIter_HasExternalLoop(NpyIter* iter)¶
Returns 1 if the caller needs to handle the inner-most 1-dimensional loop, or 0 if the iterator handles all looping. This is controlled by the constructor flag NPY_ITER_EXTERNAL_LOOP or NpyIter_EnableExternalLoop.
- npy_bool NpyIter_HasMultiIndex(NpyIter* iter)¶
Returns 1 if the iterator was created with the NPY_ITER_MULTI_INDEX flag, 0 otherwise.
- npy_bool NpyIter_HasIndex(NpyIter* iter)¶
Returns 1 if the iterator was created with the NPY_ITER_C_INDEX or NPY_ITER_F_INDEX flag, 0 otherwise.
- npy_bool NpyIter_RequiresBuffering(NpyIter* iter)¶
Returns 1 if the iterator requires buffering, which occurs when an operand needs conversion or alignment and so cannot be used directly.
- npy_bool NpyIter_IsBuffered(NpyIter* iter)¶
Returns 1 if the iterator was created with the NPY_ITER_BUFFERED flag, 0 otherwise.
- npy_bool NpyIter_IsGrowInner(NpyIter* iter)¶
Returns 1 if the iterator was created with the NPY_ITER_GROWINNER flag, 0 otherwise.
- npy_intp NpyIter_GetBufferSize(NpyIter* iter)¶
If the iterator is buffered, returns the size of the buffer being used, otherwise returns 0.
- int NpyIter_GetNDim(NpyIter* iter)¶
Returns the number of dimensions being iterated. If a multi-index was not requested in the iterator constructor, this value may be smaller than the number of dimensions in the original objects.
- npy_intp* NpyIter_GetAxisStrideArray(NpyIter* iter, int axis)¶
Gets the array of strides for the specified axis. Requires that the iterator be tracking a multi-index, and that buffering not be enabled.
This may be used when you want to match up operand axes in some fashion, then remove them with NpyIter_RemoveAxis to handle their processing manually. By calling this function before removing the axes, you can get the strides for the manual processing.
Returns NULL on error.
- int NpyIter_GetShape(NpyIter* iter, npy_intp* outshape)¶
Returns the broadcast shape of the iterator in outshape. This can only be called on an iterator which is tracking a multi-index.
Returns NPY_SUCCEED or NPY_FAIL.
- PyArray_Descr** NpyIter_GetDescrArray(NpyIter* iter)¶
This gives back a pointer to the nop data type Descrs for the objects being iterated. The result points into iter, so the caller does not gain any references to the Descrs.
This pointer may be cached before the iteration loop, calling iternext will not change it.
- PyObject** NpyIter_GetOperandArray(NpyIter* iter)¶
This gives back a pointer to the nop operand PyObjects that are being iterated. The result points into iter, so the caller does not gain any references to the PyObjects.
- PyObject* NpyIter_GetIterView(NpyIter* iter, npy_intp i)¶
This gives back a reference to a new ndarray view, which is a view into the i-th object in the array :cfunc:`NpyIter_GetOperandArray`(), whose dimensions and strides match the internal optimized iteration pattern. A C-order iteration of this view is equivalent to the iterator’s iteration order.
For example, if an iterator was created with a single array as its input, and it was possible to rearrange all its axes and then collapse it into a single strided iteration, this would return a view that is a one-dimensional array.
- void NpyIter_GetReadFlags(NpyIter* iter, char* outreadflags)¶
Fills nop flags. Sets outreadflags[i] to 1 if op[i] can be read from, and to 0 if not.
- void NpyIter_GetWriteFlags(NpyIter* iter, char* outwriteflags)¶
Fills nop flags. Sets outwriteflags[i] to 1 if op[i] can be written to, and to 0 if not.
- int NpyIter_CreateCompatibleStrides(NpyIter* iter, npy_intp itemsize, npy_intp* outstrides)¶
Builds a set of strides which are the same as the strides of an output array created using the NPY_ITER_ALLOCATE flag, where NULL was passed for op_axes. This is for data packed contiguously, but not necessarily in C or Fortran order. This should be used together with NpyIter_GetShape and NpyIter_GetNDim with the flag NPY_ITER_MULTI_INDEX passed into the constructor.
A use case for this function is to match the shape and layout of the iterator and tack on one or more dimensions. For example, in order to generate a vector per input value for a numerical gradient, you pass in ndim*itemsize for itemsize, then add another dimension to the end with size ndim and stride itemsize. To do the Hessian matrix, you do the same thing but add two dimensions, or take advantage of the symmetry and pack it into 1 dimension with a particular encoding.
This function may only be called if the iterator is tracking a multi-index and if NPY_ITER_DONT_NEGATE_STRIDES was used to prevent an axis from being iterated in reverse order.
If an array is created with this method, simply adding ‘itemsize’ for each iteration will traverse the new array matching the iterator.
Returns NPY_SUCCEED or NPY_FAIL.
Functions For Iteration¶
- NpyIter_IterNextFunc* NpyIter_GetIterNext(NpyIter* iter, char** errmsg)¶
Returns a function pointer for iteration. A specialized version of the function pointer may be calculated by this function instead of being stored in the iterator structure. Thus, to get good performance, it is required that the function pointer be saved in a variable rather than retrieved for each loop iteration.
Returns NULL if there is an error. If errmsg is non-NULL, no Python exception is set when NPY_FAIL is returned. Instead, *errmsg is set to an error message. When errmsg is non-NULL, the function may be safely called without holding the Python GIL.
The typical looping construct is as follows.
NpyIter_IterNextFunc *iternext = NpyIter_GetIterNext(iter, NULL); char** dataptr = NpyIter_GetDataPtrArray(iter); do { /* use the addresses dataptr[0], ... dataptr[nop-1] */ } while(iternext(iter));
When NPY_ITER_EXTERNAL_LOOP is specified, the typical inner loop construct is as follows.
NpyIter_IterNextFunc *iternext = NpyIter_GetIterNext(iter, NULL); char** dataptr = NpyIter_GetDataPtrArray(iter); npy_intp* stride = NpyIter_GetInnerStrideArray(iter); npy_intp* size_ptr = NpyIter_GetInnerLoopSizePtr(iter), size; npy_intp iop, nop = NpyIter_GetNOp(iter); do { size = *size_ptr; while (size--) { /* use the addresses dataptr[0], ... dataptr[nop-1] */ for (iop = 0; iop < nop; ++iop) { dataptr[iop] += stride[iop]; } } } while (iternext());
Observe that we are using the dataptr array inside the iterator, not copying the values to a local temporary. This is possible because when iternext() is called, these pointers will be overwritten with fresh values, not incrementally updated.
If a compile-time fixed buffer is being used (both flags NPY_ITER_BUFFERED and NPY_ITER_EXTERNAL_LOOP), the inner size may be used as a signal as well. The size is guaranteed to become zero when iternext() returns false, enabling the following loop construct. Note that if you use this construct, you should not pass NPY_ITER_GROWINNER as a flag, because it will cause larger sizes under some circumstances.
/* The constructor should have buffersize passed as this value */ #define FIXED_BUFFER_SIZE 1024 NpyIter_IterNextFunc *iternext = NpyIter_GetIterNext(iter, NULL); char **dataptr = NpyIter_GetDataPtrArray(iter); npy_intp *stride = NpyIter_GetInnerStrideArray(iter); npy_intp *size_ptr = NpyIter_GetInnerLoopSizePtr(iter), size; npy_intp i, iop, nop = NpyIter_GetNOp(iter); /* One loop with a fixed inner size */ size = *size_ptr; while (size == FIXED_BUFFER_SIZE) { /* * This loop could be manually unrolled by a factor * which divides into FIXED_BUFFER_SIZE */ for (i = 0; i < FIXED_BUFFER_SIZE; ++i) { /* use the addresses dataptr[0], ... dataptr[nop-1] */ for (iop = 0; iop < nop; ++iop) { dataptr[iop] += stride[iop]; } } iternext(); size = *size_ptr; } /* Finish-up loop with variable inner size */ if (size > 0) do { size = *size_ptr; while (size--) { /* use the addresses dataptr[0], ... dataptr[nop-1] */ for (iop = 0; iop < nop; ++iop) { dataptr[iop] += stride[iop]; } } } while (iternext());
- NpyIter_GetMultiIndexFunc *NpyIter_GetGetMultiIndex(NpyIter* iter, char** errmsg)¶
Returns a function pointer for getting the current multi-index of the iterator. Returns NULL if the iterator is not tracking a multi-index. It is recommended that this function pointer be cached in a local variable before the iteration loop.
Returns NULL if there is an error. If errmsg is non-NULL, no Python exception is set when NPY_FAIL is returned. Instead, *errmsg is set to an error message. When errmsg is non-NULL, the function may be safely called without holding the Python GIL.
- char** NpyIter_GetDataPtrArray(NpyIter* iter)¶
This gives back a pointer to the nop data pointers. If NPY_ITER_EXTERNAL_LOOP was not specified, each data pointer points to the current data item of the iterator. If no inner iteration was specified, it points to the first data item of the inner loop.
This pointer may be cached before the iteration loop, calling iternext will not change it. This function may be safely called without holding the Python GIL.
- char** NpyIter_GetInitialDataPtrArray(NpyIter* iter)¶
Gets the array of data pointers directly into the arrays (never into the buffers), corresponding to iteration index 0.
These pointers are different from the pointers accepted by NpyIter_ResetBasePointers, because the direction along some axes may have been reversed.
This function may be safely called without holding the Python GIL.
- npy_intp* NpyIter_GetIndexPtr(NpyIter* iter)¶
This gives back a pointer to the index being tracked, or NULL if no index is being tracked. It is only useable if one of the flags NPY_ITER_C_INDEX or NPY_ITER_F_INDEX were specified during construction.
When the flag NPY_ITER_EXTERNAL_LOOP is used, the code needs to know the parameters for doing the inner loop. These functions provide that information.
- npy_intp* NpyIter_GetInnerStrideArray(NpyIter* iter)¶
Returns a pointer to an array of the nop strides, one for each iterated object, to be used by the inner loop.
This pointer may be cached before the iteration loop, calling iternext will not change it. This function may be safely called without holding the Python GIL.
- npy_intp* NpyIter_GetInnerLoopSizePtr(NpyIter* iter)¶
Returns a pointer to the number of iterations the inner loop should execute.
This address may be cached before the iteration loop, calling iternext will not change it. The value itself may change during iteration, in particular if buffering is enabled. This function may be safely called without holding the Python GIL.
- void NpyIter_GetInnerFixedStrideArray(NpyIter* iter, npy_intp* out_strides)¶
Gets an array of strides which are fixed, or will not change during the entire iteration. For strides that may change, the value NPY_MAX_INTP is placed in the stride.
Once the iterator is prepared for iteration (after a reset if NPY_DELAY_BUFALLOC was used), call this to get the strides which may be used to select a fast inner loop function. For example, if the stride is 0, that means the inner loop can always load its value into a variable once, then use the variable throughout the loop, or if the stride equals the itemsize, a contiguous version for that operand may be used.
This function may be safely called without holding the Python GIL.
