# Multidimensional image processing (`scipy.ndimage`

)¶

## Introduction¶

Image processing and analysis are generally seen as operations on
two-dimensional arrays of values. There are however a number of
fields where images of higher dimensionality must be analyzed. Good
examples of these are medical imaging and biological imaging.
`numpy`

is suited very well for this type of applications due
its inherent multidimensional nature. The `scipy.ndimage`

packages provides a number of general image processing and analysis
functions that are designed to operate with arrays of arbitrary
dimensionality. The packages currently includes functions for
linear and non-linear filtering, binary morphology, B-spline
interpolation, and object measurements.

## Filter functions¶

The functions described in this section all perform some type of spatial
filtering of the input array: the elements in the output are some function
of the values in the neighborhood of the corresponding input element. We refer
to this neighborhood of elements as the filter kernel, which is often
rectangular in shape but may also have an arbitrary footprint. Many
of the functions described below allow you to define the footprint
of the kernel, by passing a mask through the *footprint* parameter.
For example a cross shaped kernel can be defined as follows:

```
>>> footprint = np.array([[0, 1, 0], [1, 1, 1], [0, 1, 0]])
>>> footprint
array([[0, 1, 0],
[1, 1, 1],
[0, 1, 0]])
```

Usually the origin of the kernel is at the center calculated by dividing the dimensions of the kernel shape by two. For instance, the origin of a one-dimensional kernel of length three is at the second element. Take for example the correlation of a one-dimensional array with a filter of length 3 consisting of ones:

```
>>> from scipy.ndimage import correlate1d
>>> a = [0, 0, 0, 1, 0, 0, 0]
>>> correlate1d(a, [1, 1, 1])
array([0, 0, 1, 1, 1, 0, 0])
```

Sometimes it is convenient to choose a different origin for the
kernel. For this reason most functions support the *origin*
parameter which gives the origin of the filter relative to its
center. For example:

```
>>> a = [0, 0, 0, 1, 0, 0, 0]
>>> correlate1d(a, [1, 1, 1], origin = -1)
array([0, 1, 1, 1, 0, 0, 0])
```

The effect is a shift of the result towards the left. This feature will not be needed very often, but it may be useful especially for filters that have an even size. A good example is the calculation of backward and forward differences:

```
>>> a = [0, 0, 1, 1, 1, 0, 0]
>>> correlate1d(a, [-1, 1]) # backward difference
array([ 0, 0, 1, 0, 0, -1, 0])
>>> correlate1d(a, [-1, 1], origin = -1) # forward difference
array([ 0, 1, 0, 0, -1, 0, 0])
```

We could also have calculated the forward difference as follows:

```
>>> correlate1d(a, [0, -1, 1])
array([ 0, 1, 0, 0, -1, 0, 0])
```

However, using the origin parameter instead of a larger kernel is
more efficient. For multidimensional kernels *origin* can be a
number, in which case the origin is assumed to be equal along all
axes, or a sequence giving the origin along each axis.

Since the output elements are a function of elements in the
neighborhood of the input elements, the borders of the array need to
be dealt with appropriately by providing the values outside the
borders. This is done by assuming that the arrays are extended beyond
their boundaries according certain boundary conditions. In the
functions described below, the boundary conditions can be selected
using the *mode* parameter which must be a string with the name of the
boundary condition. The following boundary conditions are currently
supported:

“nearest” Use the value at the boundary [1 2 3]->[1 1 2 3 3] “wrap” Periodically replicate the array [1 2 3]->[3 1 2 3 1] “reflect” Reflect the array at the boundary [1 2 3]->[1 1 2 3 3] “constant” Use a constant value, default is 0.0 [1 2 3]->[0 1 2 3 0]

The “constant” mode is special since it needs an additional parameter to specify the constant value that should be used.

Note

The easiest way to implement such boundary conditions would be to copy the data to a larger array and extend the data at the borders according to the boundary conditions. For large arrays and large filter kernels, this would be very memory consuming, and the functions described below therefore use a different approach that does not require allocating large temporary buffers.

### Correlation and convolution¶

The

`correlate1d`

function calculates a one-dimensional correlation along the given axis. The lines of the array along the given axis are correlated with the given*weights*. The*weights*parameter must be a one-dimensional sequences of numbers.The function

`correlate`

implements multidimensional correlation of the input array with a given kernel.The

`convolve1d`

function calculates a one-dimensional convolution along the given axis. The lines of the array along the given axis are convoluted with the given*weights*. The*weights*parameter must be a one-dimensional sequences of numbers.Note

A convolution is essentially a correlation after mirroring the kernel. As a result, the

*origin*parameter behaves differently than in the case of a correlation: the result is shifted in the opposite directions.The function

`convolve`

implements multidimensional convolution of the input array with a given kernel.Note

A convolution is essentially a correlation after mirroring the kernel. As a result, the

*origin*parameter behaves differently than in the case of a correlation: the results is shifted in the opposite direction.

### Smoothing filters¶

The

`gaussian_filter1d`

function implements a one-dimensional Gaussian filter. The standard-deviation of the Gaussian filter is passed through the parameter*sigma*. Setting*order*= 0 corresponds to convolution with a Gaussian kernel. An order of 1, 2, or 3 corresponds to convolution with the first, second or third derivatives of a Gaussian. Higher order derivatives are not implemented.The

`gaussian_filter`

function implements a multidimensional Gaussian filter. The standard-deviations of the Gaussian filter along each axis are passed through the parameter*sigma*as a sequence or numbers. If*sigma*is not a sequence but a single number, the standard deviation of the filter is equal along all directions. The order of the filter can be specified separately for each axis. An order of 0 corresponds to convolution with a Gaussian kernel. An order of 1, 2, or 3 corresponds to convolution with the first, second or third derivatives of a Gaussian. Higher order derivatives are not implemented. The*order*parameter must be a number, to specify the same order for all axes, or a sequence of numbers to specify a different order for each axis.Note

The multidimensional filter is implemented as a sequence of one-dimensional Gaussian filters. The intermediate arrays are stored in the same data type as the output. Therefore, for output types with a lower precision, the results may be imprecise because intermediate results may be stored with insufficient precision. This can be prevented by specifying a more precise output type.

The

`uniform_filter1d`

function calculates a one-dimensional uniform filter of the given*size*along the given axis.The

`uniform_filter`

implements a multidimensional uniform filter. The sizes of the uniform filter are given for each axis as a sequence of integers by the*size*parameter. If*size*is not a sequence, but a single number, the sizes along all axis are assumed to be equal.Note

The multidimensional filter is implemented as a sequence of one-dimensional uniform filters. The intermediate arrays are stored in the same data type as the output. Therefore, for output types with a lower precision, the results may be imprecise because intermediate results may be stored with insufficient precision. This can be prevented by specifying a more precise output type.

### Filters based on order statistics¶

- The
`minimum_filter1d`

function calculates a one-dimensional minimum filter of given*size*along the given axis. - The
`maximum_filter1d`

function calculates a one-dimensional maximum filter of given*size*along the given axis. - The
`minimum_filter`

function calculates a multidimensional minimum filter. Either the sizes of a rectangular kernel or the footprint of the kernel must be provided. The*size*parameter, if provided, must be a sequence of sizes or a single number in which case the size of the filter is assumed to be equal along each axis. The*footprint*, if provided, must be an array that defines the shape of the kernel by its non-zero elements. - The
`maximum_filter`

function calculates a multidimensional maximum filter. Either the sizes of a rectangular kernel or the footprint of the kernel must be provided. The*size*parameter, if provided, must be a sequence of sizes or a single number in which case the size of the filter is assumed to be equal along each axis. The*footprint*, if provided, must be an array that defines the shape of the kernel by its non-zero elements. - The
`rank_filter`

function calculates a multidimensional rank filter. The*rank*may be less then zero, i.e.,*rank*= -1 indicates the largest element. Either the sizes of a rectangular kernel or the footprint of the kernel must be provided. The*size*parameter, if provided, must be a sequence of sizes or a single number in which case the size of the filter is assumed to be equal along each axis. The*footprint*, if provided, must be an array that defines the shape of the kernel by its non-zero elements. - The
`percentile_filter`

function calculates a multidimensional percentile filter. The*percentile*may be less then zero, i.e.,*percentile*= -20 equals*percentile*= 80. Either the sizes of a rectangular kernel or the footprint of the kernel must be provided. The*size*parameter, if provided, must be a sequence of sizes or a single number in which case the size of the filter is assumed to be equal along each axis. The*footprint*, if provided, must be an array that defines the shape of the kernel by its non-zero elements. - The
`median_filter`

function calculates a multidimensional median filter. Either the sizes of a rectangular kernel or the footprint of the kernel must be provided. The*size*parameter, if provided, must be a sequence of sizes or a single number in which case the size of the filter is assumed to be equal along each axis. The*footprint*if provided, must be an array that defines the shape of the kernel by its non-zero elements.

### Derivatives¶

Derivative filters can be constructed in several ways. The function
`gaussian_filter1d`

described in
Smoothing filters can be used to calculate
derivatives along a given axis using the *order* parameter. Other
derivative filters are the Prewitt and Sobel filters:

- The
`prewitt`

function calculates a derivative along the given axis. - The
`sobel`

function calculates a derivative along the given axis.

The Laplace filter is calculated by the sum of the second derivatives along all axes. Thus, different Laplace filters can be constructed using different second derivative functions. Therefore we provide a general function that takes a function argument to calculate the second derivative along a given direction.

The function

`generic_laplace`

calculates a laplace filter using the function passed through`derivative2`

to calculate second derivatives. The function`derivative2`

should have the following signaturederivative2(input, axis, output, mode, cval, *extra_arguments, **extra_keywords)

It should calculate the second derivative along the dimension

*axis*. If*output*is not`None`

it should use that for the output and return None, otherwise it should return the result.*mode*,*cval*have the usual meaning.The

*extra_arguments*and*extra_keywords*arguments can be used to pass a tuple of extra arguments and a dictionary of named arguments that are passed to`derivative2`

at each call.For example

>>> def d2(input, axis, output, mode, cval): ... return correlate1d(input, [1, -2, 1], axis, output, mode, cval, 0) ... >>> a = np.zeros((5, 5)) >>> a[2, 2] = 1 >>> from scipy.ndimage import generic_laplace >>> generic_laplace(a, d2) array([[ 0., 0., 0., 0., 0.], [ 0., 0., 1., 0., 0.], [ 0., 1., -4., 1., 0.], [ 0., 0., 1., 0., 0.], [ 0., 0., 0., 0., 0.]])

To demonstrate the use of the

*extra_arguments*argument we could do>>> def d2(input, axis, output, mode, cval, weights): ... return correlate1d(input, weights, axis, output, mode, cval, 0,) ... >>> a = np.zeros((5, 5)) >>> a[2, 2] = 1 >>> generic_laplace(a, d2, extra_arguments = ([1, -2, 1],)) array([[ 0., 0., 0., 0., 0.], [ 0., 0., 1., 0., 0.], [ 0., 1., -4., 1., 0.], [ 0., 0., 1., 0., 0.], [ 0., 0., 0., 0., 0.]])

or

>>> generic_laplace(a, d2, extra_keywords = {'weights': [1, -2, 1]}) array([[ 0., 0., 0., 0., 0.], [ 0., 0., 1., 0., 0.], [ 0., 1., -4., 1., 0.], [ 0., 0., 1., 0., 0.], [ 0., 0., 0., 0., 0.]])

The following two functions are implemented using
`generic_laplace`

by providing appropriate functions for the
second derivative function:

- The function
`laplace`

calculates the Laplace using discrete differentiation for the second derivative (i.e. convolution with`[1, -2, 1]`

). - The function
`gaussian_laplace`

calculates the Laplace filter using`gaussian_filter`

to calculate the second derivatives. The standard-deviations of the Gaussian filter along each axis are passed through the parameter*sigma*as a sequence or numbers. If*sigma*is not a sequence but a single number, the standard deviation of the filter is equal along all directions.

The gradient magnitude is defined as the square root of the sum of the
squares of the gradients in all directions. Similar to the generic
Laplace function there is a `generic_gradient_magnitude`

function that calculats the gradient magnitude of an array.

The function

`generic_gradient_magnitude`

calculates a gradient magnitude using the function passed through`derivative`

to calculate first derivatives. The function`derivative`

should have the following signaturederivative(input, axis, output, mode, cval, *extra_arguments, **extra_keywords)

It should calculate the derivative along the dimension

*axis*. If*output*is not None it should use that for the output and return None, otherwise it should return the result.*mode*,*cval*have the usual meaning.The

*extra_arguments*and*extra_keywords*arguments can be used to pass a tuple of extra arguments and a dictionary of named arguments that are passed to*derivative*at each call.For example, the

`sobel`

function fits the required signature>>> a = np.zeros((5, 5)) >>> a[2, 2] = 1 >>> from scipy.ndimage import sobel, generic_gradient_magnitude >>> generic_gradient_magnitude(a, sobel) array([[ 0. , 0. , 0. , 0. , 0. ], [ 0. , 1.41421356, 2. , 1.41421356, 0. ], [ 0. , 2. , 0. , 2. , 0. ], [ 0. , 1.41421356, 2. , 1.41421356, 0. ], [ 0. , 0. , 0. , 0. , 0. ]])

See the documentation of

`generic_laplace`

for examples of using the*extra_arguments*and*extra_keywords*arguments.

The `sobel`

and `prewitt`

functions fit the required
signature and can therefore directly be used with
`generic_gradient_magnitude`

.

- The function
`gaussian_gradient_magnitude`

calculates the gradient magnitude using`gaussian_filter`

to calculate the first derivatives. The standard-deviations of the Gaussian filter along each axis are passed through the parameter*sigma*as a sequence or numbers. If*sigma*is not a sequence but a single number, the standard deviation of the filter is equal along all directions.

### Generic filter functions¶

To implement filter functions, generic functions can be used that
accept a callable object that implements the filtering operation. The
iteration over the input and output arrays is handled by these generic
functions, along with such details as the implementation of the
boundary conditions. Only a callable object implementing a callback
function that does the actual filtering work must be provided. The
callback function can also be written in C and passed using a
`PyCapsule`

(see Extending scipy.ndimage in C for more
information).

The

`generic_filter1d`

function implements a generic one-dimensional filter function, where the actual filtering operation must be supplied as a python function (or other callable object). The`generic_filter1d`

function iterates over the lines of an array and calls`function`

at each line. The arguments that are passed to`function`

are one-dimensional arrays of the`np.float64`

type. The first contains the values of the current line. It is extended at the beginning end the end, according to the*filter_size*and*origin*arguments. The second array should be modified in-place to provide the output values of the line. For example consider a correlation along one dimension:>>> a = np.arange(12).reshape(3,4) >>> correlate1d(a, [1, 2, 3]) array([[ 3, 8, 14, 17], [27, 32, 38, 41], [51, 56, 62, 65]])

The same operation can be implemented using

`generic_filter1d`

as follows:>>> def fnc(iline, oline): ... oline[...] = iline[:-2] + 2 * iline[1:-1] + 3 * iline[2:] ... >>> from scipy.ndimage import generic_filter1d >>> generic_filter1d(a, fnc, 3) array([[ 3, 8, 14, 17], [27, 32, 38, 41], [51, 56, 62, 65]])

Here the origin of the kernel was (by default) assumed to be in the middle of the filter of length 3. Therefore, each input line was extended by one value at the beginning and at the end, before the function was called.

Optionally extra arguments can be defined and passed to the filter function. The

*extra_arguments*and*extra_keywords*arguments can be used to pass a tuple of extra arguments and/or a dictionary of named arguments that are passed to derivative at each call. For example, we can pass the parameters of our filter as an argument>>> def fnc(iline, oline, a, b): ... oline[...] = iline[:-2] + a * iline[1:-1] + b * iline[2:] ... >>> generic_filter1d(a, fnc, 3, extra_arguments = (2, 3)) array([[ 3, 8, 14, 17], [27, 32, 38, 41], [51, 56, 62, 65]])

or

>>> generic_filter1d(a, fnc, 3, extra_keywords = {'a':2, 'b':3}) array([[ 3, 8, 14, 17], [27, 32, 38, 41], [51, 56, 62, 65]])

The

`generic_filter`

function implements a generic filter function, where the actual filtering operation must be supplied as a python function (or other callable object). The`generic_filter`

function iterates over the array and calls`function`

at each element. The argument of`function`

is a one-dimensional array of the`np.float64`

type, that contains the values around the current element that are within the footprint of the filter. The function should return a single value that can be converted to a double precision number. For example consider a correlation:>>> a = np.arange(12).reshape(3,4) >>> correlate(a, [[1, 0], [0, 3]]) array([[ 0, 3, 7, 11], [12, 15, 19, 23], [28, 31, 35, 39]])

The same operation can be implemented using

*generic_filter*as follows:>>> def fnc(buffer): ... return (buffer * np.array([1, 3])).sum() ... >>> from scipy.ndimage import generic_filter >>> generic_filter(a, fnc, footprint = [[1, 0], [0, 1]]) array([[ 0, 3, 7, 11], [12, 15, 19, 23], [28, 31, 35, 39]])

Here a kernel footprint was specified that contains only two elements. Therefore the filter function receives a buffer of length equal to two, which was multiplied with the proper weights and the result summed.

When calling

`generic_filter`

, either the sizes of a rectangular kernel or the footprint of the kernel must be provided. The*size*parameter, if provided, must be a sequence of sizes or a single number in which case the size of the filter is assumed to be equal along each axis. The*footprint*, if provided, must be an array that defines the shape of the kernel by its non-zero elements.Optionally extra arguments can be defined and passed to the filter function. The

*extra_arguments*and*extra_keywords*arguments can be used to pass a tuple of extra arguments and/or a dictionary of named arguments that are passed to derivative at each call. For example, we can pass the parameters of our filter as an argument>>> def fnc(buffer, weights): ... weights = np.asarray(weights) ... return (buffer * weights).sum() ... >>> generic_filter(a, fnc, footprint = [[1, 0], [0, 1]], extra_arguments = ([1, 3],)) array([[ 0, 3, 7, 11], [12, 15, 19, 23], [28, 31, 35, 39]])

or

>>> generic_filter(a, fnc, footprint = [[1, 0], [0, 1]], extra_keywords= {'weights': [1, 3]}) array([[ 0, 3, 7, 11], [12, 15, 19, 23], [28, 31, 35, 39]])

These functions iterate over the lines or elements starting at the
last axis, i.e. the last index changes the fastest. This order of
iteration is guaranteed for the case that it is important to adapt the
filter depending on spatial location. Here is an example of using a
class that implements the filter and keeps track of the current
coordinates while iterating. It performs the same filter operation as
described above for `generic_filter`

, but additionally prints
the current coordinates:

```
>>> a = np.arange(12).reshape(3,4)
>>>
>>> class fnc_class:
... def __init__(self, shape):
... # store the shape:
... self.shape = shape
... # initialize the coordinates:
... self.coordinates = [0] * len(shape)
...
... def filter(self, buffer):
... result = (buffer * np.array([1, 3])).sum()
... print(self.coordinates)
... # calculate the next coordinates:
... axes = list(range(len(self.shape)))
... axes.reverse()
... for jj in axes:
... if self.coordinates[jj] < self.shape[jj] - 1:
... self.coordinates[jj] += 1
... break
... else:
... self.coordinates[jj] = 0
... return result
...
>>> fnc = fnc_class(shape = (3,4))
>>> generic_filter(a, fnc.filter, footprint = [[1, 0], [0, 1]])
[0, 0]
[0, 1]
[0, 2]
[0, 3]
[1, 0]
[1, 1]
[1, 2]
[1, 3]
[2, 0]
[2, 1]
[2, 2]
[2, 3]
array([[ 0, 3, 7, 11],
[12, 15, 19, 23],
[28, 31, 35, 39]])
```

For the `generic_filter1d`

function the same approach works,
except that this function does not iterate over the axis that is being
filtered. The example for `generic_filter1d`

then becomes this:

```
>>> a = np.arange(12).reshape(3,4)
>>>
>>> class fnc1d_class:
... def __init__(self, shape, axis = -1):
... # store the filter axis:
... self.axis = axis
... # store the shape:
... self.shape = shape
... # initialize the coordinates:
... self.coordinates = [0] * len(shape)
...
... def filter(self, iline, oline):
... oline[...] = iline[:-2] + 2 * iline[1:-1] + 3 * iline[2:]
... print(self.coordinates)
... # calculate the next coordinates:
... axes = list(range(len(self.shape)))
... # skip the filter axis:
... del axes[self.axis]
... axes.reverse()
... for jj in axes:
... if self.coordinates[jj] < self.shape[jj] - 1:
... self.coordinates[jj] += 1
... break
... else:
... self.coordinates[jj] = 0
...
>>> fnc = fnc1d_class(shape = (3,4))
>>> generic_filter1d(a, fnc.filter, 3)
[0, 0]
[1, 0]
[2, 0]
array([[ 3, 8, 14, 17],
[27, 32, 38, 41],
[51, 56, 62, 65]])
```

### Fourier domain filters¶

The functions described in this section perform filtering
operations in the Fourier domain. Thus, the input array of such a
function should be compatible with an inverse Fourier transform
function, such as the functions from the `numpy.fft`

module. We
therefore have to deal with arrays that may be the result of a real
or a complex Fourier transform. In the case of a real Fourier
transform only half of the of the symmetric complex transform is
stored. Additionally, it needs to be known what the length of the
axis was that was transformed by the real fft. The functions
described here provide a parameter *n* that in the case of a real
transform must be equal to the length of the real transform axis
before transformation. If this parameter is less than zero, it is
assumed that the input array was the result of a complex Fourier
transform. The parameter *axis* can be used to indicate along which
axis the real transform was executed.

- The
`fourier_shift`

function multiplies the input array with the multidimensional Fourier transform of a shift operation for the given shift. The*shift*parameter is a sequences of shifts for each dimension, or a single value for all dimensions. - The
`fourier_gaussian`

function multiplies the input array with the multidimensional Fourier transform of a Gaussian filter with given standard-deviations*sigma*. The*sigma*parameter is a sequences of values for each dimension, or a single value for all dimensions. - The
`fourier_uniform`

function multiplies the input array with the multidimensional Fourier transform of a uniform filter with given sizes*size*. The*size*parameter is a sequences of values for each dimension, or a single value for all dimensions. - The
`fourier_ellipsoid`

function multiplies the input array with the multidimensional Fourier transform of a elliptically shaped filter with given sizes*size*. The*size*parameter is a sequences of values for each dimension, or a single value for all dimensions. This function is only implemented for dimensions 1, 2, and 3.

## Interpolation functions¶

This section describes various interpolation functions that are based on B-spline theory. A good introduction to B-splines can be found in [1].

### Spline pre-filters¶

Interpolation using splines of an order larger than 1 requires a
pre-filtering step. The interpolation functions described in section
Interpolation functions apply pre-filtering by calling
`spline_filter`

, but they can be instructed not to do this by
setting the *prefilter* keyword equal to False. This is useful if more
than one interpolation operation is done on the same array. In this
case it is more efficient to do the pre-filtering only once and use a
prefiltered array as the input of the interpolation functions. The
following two functions implement the pre-filtering:

The

`spline_filter1d`

function calculates a one-dimensional spline filter along the given axis. An output array can optionally be provided. The order of the spline must be larger then 1 and less than 6.The

`spline_filter`

function calculates a multidimensional spline filter.Note

The multidimensional filter is implemented as a sequence of one-dimensional spline filters. The intermediate arrays are stored in the same data type as the output. Therefore, if an output with a limited precision is requested, the results may be imprecise because intermediate results may be stored with insufficient precision. This can be prevented by specifying a output type of high precision.

### Interpolation functions¶

Following functions all employ spline interpolation to effect some
type of geometric transformation of the input array. This requires a
mapping of the output coordinates to the input coordinates, and
therefore the possibility arises that input values outside the
boundaries are needed. This problem is solved in the same way as
described in Filter functions for the multidimensional
filter functions. Therefore these functions all support a *mode*
parameter that determines how the boundaries are handled, and a *cval*
parameter that gives a constant value in case that the ‘constant’ mode
is used.

The

`geometric_transform`

function applies an arbitrary geometric transform to the input. The given*mapping*function is called at each point in the output to find the corresponding coordinates in the input.*mapping*must be a callable object that accepts a tuple of length equal to the output array rank and returns the corresponding input coordinates as a tuple of length equal to the input array rank. The output shape and output type can optionally be provided. If not given they are equal to the input shape and type.For example:

>>> a = np.arange(12).reshape(4,3).astype(np.float64) >>> def shift_func(output_coordinates): ... return (output_coordinates[0] - 0.5, output_coordinates[1] - 0.5) ... >>> from scipy.ndimage import geometric_transform >>> geometric_transform(a, shift_func) array([[ 0. , 0. , 0. ], [ 0. , 1.3625, 2.7375], [ 0. , 4.8125, 6.1875], [ 0. , 8.2625, 9.6375]])

Optionally extra arguments can be defined and passed to the filter function. The

*extra_arguments*and*extra_keywords*arguments can be used to pass a tuple of extra arguments and/or a dictionary of named arguments that are passed to derivative at each call. For example, we can pass the shifts in our example as arguments>>> def shift_func(output_coordinates, s0, s1): ... return (output_coordinates[0] - s0, output_coordinates[1] - s1) ... >>> geometric_transform(a, shift_func, extra_arguments = (0.5, 0.5)) array([[ 0. , 0. , 0. ], [ 0. , 1.3625, 2.7375], [ 0. , 4.8125, 6.1875], [ 0. , 8.2625, 9.6375]])

or

>>> geometric_transform(a, shift_func, extra_keywords = {'s0': 0.5, 's1': 0.5}) array([[ 0. , 0. , 0. ], [ 0. , 1.3625, 2.7375], [ 0. , 4.8125, 6.1875], [ 0. , 8.2625, 9.6375]])

Note

The mapping function can also be written in C and passed using a

`scipy.LowLevelCallable`

. See Extending scipy.ndimage in C for more information.The function

`map_coordinates`

applies an arbitrary coordinate transformation using the given array of coordinates. The shape of the output is derived from that of the coordinate array by dropping the first axis. The parameter*coordinates*is used to find for each point in the output the corresponding coordinates in the input. The values of*coordinates*along the first axis are the coordinates in the input array at which the output value is found. (See also the numarray*coordinates*function.) Since the coordinates may be non- integer coordinates, the value of the input at these coordinates is determined by spline interpolation of the requested order.Here is an example that interpolates a 2D array at

`(0.5, 0.5)`

and`(1, 2)`

:>>> a = np.arange(12).reshape(4,3).astype(np.float64) >>> a array([[ 0., 1., 2.], [ 3., 4., 5.], [ 6., 7., 8.], [ 9., 10., 11.]]) >>> from scipy.ndimage import map_coordinates >>> map_coordinates(a, [[0.5, 2], [0.5, 1]]) array([ 1.3625, 7.])

The

`affine_transform`

function applies an affine transformation to the input array. The given transformation*matrix*and*offset*are used to find for each point in the output the corresponding coordinates in the input. The value of the input at the calculated coordinates is determined by spline interpolation of the requested order. The transformation*matrix*must be two-dimensional or can also be given as a one-dimensional sequence or array. In the latter case, it is assumed that the matrix is diagonal. A more efficient interpolation algorithm is then applied that exploits the separability of the problem. The output shape and output type can optionally be provided. If not given they are equal to the input shape and type.The

`shift`

function returns a shifted version of the input, using spline interpolation of the requested*order*.The

`zoom`

function returns a rescaled version of the input, using spline interpolation of the requested*order*.The

`rotate`

function returns the input array rotated in the plane defined by the two axes given by the parameter*axes*, using spline interpolation of the requested*order*. The angle must be given in degrees. If*reshape*is true, then the size of the output array is adapted to contain the rotated input.

## Morphology¶

### Binary morphology¶

The

`generate_binary_structure`

functions generates a binary structuring element for use in binary morphology operations. The*rank*of the structure must be provided. The size of the structure that is returned is equal to three in each direction. The value of each element is equal to one if the square of the Euclidean distance from the element to the center is less or equal to*connectivity*. For instance, two dimensional 4-connected and 8-connected structures are generated as follows:>>> from scipy.ndimage import generate_binary_structure >>> generate_binary_structure(2, 1) array([[False, True, False], [ True, True, True], [False, True, False]], dtype=bool) >>> generate_binary_structure(2, 2) array([[ True, True, True], [ True, True, True], [ True, True, True]], dtype=bool)

Most binary morphology functions can be expressed in terms of the basic operations erosion and dilation.

- The
`binary_erosion`

function implements binary erosion of arrays of arbitrary rank with the given structuring element. The origin parameter controls the placement of the structuring element as described in Filter functions. If no structuring element is provided, an element with connectivity equal to one is generated using`generate_binary_structure`

. The*border_value*parameter gives the value of the array outside boundaries. The erosion is repeated*iterations*times. If*iterations*is less than one, the erosion is repeated until the result does not change anymore. If a*mask*array is given, only those elements with a true value at the corresponding mask element are modified at each iteration. - The
`binary_dilation`

function implements binary dilation of arrays of arbitrary rank with the given structuring element. The origin parameter controls the placement of the structuring element as described in Filter functions. If no structuring element is provided, an element with connectivity equal to one is generated using`generate_binary_structure`

. The*border_value*parameter gives the value of the array outside boundaries. The dilation is repeated*iterations*times. If*iterations*is less than one, the dilation is repeated until the result does not change anymore. If a*mask*array is given, only those elements with a true value at the corresponding mask element are modified at each iteration.

Here is an example of using `binary_dilation`

to find all elements
that touch the border, by repeatedly dilating an empty array from
the border using the data array as the mask:

```
>>> struct = np.array([[0, 1, 0], [1, 1, 1], [0, 1, 0]])
>>> a = np.array([[1,0,0,0,0], [1,1,0,1,0], [0,0,1,1,0], [0,0,0,0,0]])
>>> a
array([[1, 0, 0, 0, 0],
[1, 1, 0, 1, 0],
[0, 0, 1, 1, 0],
[0, 0, 0, 0, 0]])
>>> from scipy.ndimage import binary_dilation
>>> binary_dilation(np.zeros(a.shape), struct, -1, a, border_value=1)
array([[ True, False, False, False, False],
[ True, True, False, False, False],
[False, False, False, False, False],
[False, False, False, False, False]], dtype=bool)
```

The `binary_erosion`

and `binary_dilation`

functions both
have an *iterations* parameter which allows the erosion or dilation to
be repeated a number of times. Repeating an erosion or a dilation with
a given structure *n* times is equivalent to an erosion or a dilation
with a structure that is *n-1* times dilated with itself. A function
is provided that allows the calculation of a structure that is dilated
a number of times with itself:

The

`iterate_structure`

function returns a structure by dilation of the input structure*iteration*- 1 times with itself.For instance:

>>> struct = generate_binary_structure(2, 1) >>> struct array([[False, True, False], [ True, True, True], [False, True, False]], dtype=bool) >>> from scipy.ndimage import iterate_structure >>> iterate_structure(struct, 2) array([[False, False, True, False, False], [False, True, True, True, False], [ True, True, True, True, True], [False, True, True, True, False], [False, False, True, False, False]], dtype=bool) If the origin of the original structure is equal to 0, then it is also equal to 0 for the iterated structure. If not, the origin must also be adapted if the equivalent of the *iterations* erosions or dilations must be achieved with the iterated structure. The adapted origin is simply obtained by multiplying with the number of iterations. For convenience the :func:`iterate_structure` also returns the adapted origin if the *origin* parameter is not ``None``: .. code:: python >>> iterate_structure(struct, 2, -1) (array([[False, False, True, False, False], [False, True, True, True, False], [ True, True, True, True, True], [False, True, True, True, False], [False, False, True, False, False]], dtype=bool), [-2, -2])

Other morphology operations can be defined in terms of erosion and d dilation. The following functions provide a few of these operations for convenience:

- The
`binary_opening`

function implements binary opening of arrays of arbitrary rank with the given structuring element. Binary opening is equivalent to a binary erosion followed by a binary dilation with the same structuring element. The origin parameter controls the placement of the structuring element as described in Filter functions. If no structuring element is provided, an element with connectivity equal to one is generated using`generate_binary_structure`

. The*iterations*parameter gives the number of erosions that is performed followed by the same number of dilations. - The
`binary_closing`

function implements binary closing of arrays of arbitrary rank with the given structuring element. Binary closing is equivalent to a binary dilation followed by a binary erosion with the same structuring element. The origin parameter controls the placement of the structuring element as described in Filter functions. If no structuring element is provided, an element with connectivity equal to one is generated using`generate_binary_structure`

. The*iterations*parameter gives the number of dilations that is performed followed by the same number of erosions. - The
`binary_fill_holes`

function is used to close holes in objects in a binary image, where the structure defines the connectivity of the holes. The origin parameter controls the placement of the structuring element as described in Filter functions. If no structuring element is provided, an element with connectivity equal to one is generated using`generate_binary_structure`

. - The
`binary_hit_or_miss`

function implements a binary hit-or-miss transform of arrays of arbitrary rank with the given structuring elements. The hit-or-miss transform is calculated by erosion of the input with the first structure, erosion of the logical*not*of the input with the second structure, followed by the logical*and*of these two erosions. The origin parameters control the placement of the structuring elements as described in Filter functions. If*origin2*equals None it is set equal to the*origin1*parameter. If the first structuring element is not provided, a structuring element with connectivity equal to one is generated using`generate_binary_structure`

, if*structure2*is not provided, it is set equal to the logical*not*of*structure1*.

### Grey-scale morphology¶

Grey-scale morphology operations are the equivalents of binary
morphology operations that operate on arrays with arbitrary values.
Below we describe the grey-scale equivalents of erosion, dilation,
opening and closing. These operations are implemented in a similar
fashion as the filters described in Filter functions,
and we refer to this section for the description of filter kernels and
footprints, and the handling of array borders. The grey-scale
morphology operations optionally take a *structure* parameter that
gives the values of the structuring element. If this parameter is not
given the structuring element is assumed to be flat with a value equal
to zero. The shape of the structure can optionally be defined by the
*footprint* parameter. If this parameter is not given, the structure
is assumed to be rectangular, with sizes equal to the dimensions of
the *structure* array, or by the *size* parameter if *structure* is
not given. The *size* parameter is only used if both *structure* and
*footprint* are not given, in which case the structuring element is
assumed to be rectangular and flat with the dimensions given by
*size*. The *size* parameter, if provided, must be a sequence of sizes
or a single number in which case the size of the filter is assumed to
be equal along each axis. The *footprint* parameter, if provided, must
be an array that defines the shape of the kernel by its non-zero
elements.

Similar to binary erosion and dilation there are operations for grey-scale erosion and dilation:

- The
`grey_erosion`

function calculates a multidimensional grey- scale erosion. - The
`grey_dilation`

function calculates a multidimensional grey-scale dilation.

Grey-scale opening and closing operations can be defined similar to their binary counterparts:

- The
`grey_opening`

function implements grey-scale opening of arrays of arbitrary rank. Grey-scale opening is equivalent to a grey-scale erosion followed by a grey-scale dilation. - The
`grey_closing`

function implements grey-scale closing of arrays of arbitrary rank. Grey-scale opening is equivalent to a grey-scale dilation followed by a grey-scale erosion. - The
`morphological_gradient`

function implements a grey-scale morphological gradient of arrays of arbitrary rank. The grey-scale morphological gradient is equal to the difference of a grey-scale dilation and a grey-scale erosion. - The
`morphological_laplace`

function implements a grey-scale morphological laplace of arrays of arbitrary rank. The grey-scale morphological laplace is equal to the sum of a grey-scale dilation and a grey-scale erosion minus twice the input. - The
`white_tophat`

function implements a white top-hat filter of arrays of arbitrary rank. The white top-hat is equal to the difference of the input and a grey-scale opening. - The
`black_tophat`

function implements a black top-hat filter of arrays of arbitrary rank. The black top-hat is equal to the difference of a grey-scale closing and the input.

## Distance transforms¶

Distance transforms are used to calculate the minimum distance from each element of an object to the background. The following functions implement distance transforms for three different distance metrics: Euclidean, City Block, and Chessboard distances.

The function

`distance_transform_cdt`

uses a chamfer type algorithm to calculate the distance transform of the input, by replacing each object element (defined by values larger than zero) with the shortest distance to the background (all non-object elements). The structure determines the type of chamfering that is done. If the structure is equal to ‘cityblock’ a structure is generated using`generate_binary_structure`

with a squared distance equal to 1. If the structure is equal to ‘chessboard’, a structure is generated using`generate_binary_structure`

with a squared distance equal to the rank of the array. These choices correspond to the common interpretations of the cityblock and the chessboard distance metrics in two dimensions.In addition to the distance transform, the feature transform can be calculated. In this case the index of the closest background element is returned along the first axis of the result. The

*return_distances*, and*return_indices*flags can be used to indicate if the distance transform, the feature transform, or both must be returned.The

*distances*and*indices*arguments can be used to give optional output arrays that must be of the correct size and type (both`np.int32`

). The basics of the algorithm used to implement this function is described in [2].The function

`distance_transform_edt`

calculates the exact euclidean distance transform of the input, by replacing each object element (defined by values larger than zero) with the shortest euclidean distance to the background (all non-object elements).In addition to the distance transform, the feature transform can be calculated. In this case the index of the closest background element is returned along the first axis of the result. The

*return_distances*, and*return_indices*flags can be used to indicate if the distance transform, the feature transform, or both must be returned.Optionally the sampling along each axis can be given by the

*sampling*parameter which should be a sequence of length equal to the input rank, or a single number in which the sampling is assumed to be equal along all axes.The

*distances*and*indices*arguments can be used to give optional output arrays that must be of the correct size and type (`np.float64`

and`np.int32`

).The algorithm used to implement this function is described in [3].The function

`distance_transform_bf`

uses a brute-force algorithm to calculate the distance transform of the input, by replacing each object element (defined by values larger than zero) with the shortest distance to the background (all non-object elements). The metric must be one of “euclidean”, “cityblock”, or “chessboard”.In addition to the distance transform, the feature transform can be calculated. In this case the index of the closest background element is returned along the first axis of the result. The

*return_distances*, and*return_indices*flags can be used to indicate if the distance transform, the feature transform, or both must be returned.Optionally the sampling along each axis can be given by the

*sampling*parameter which should be a sequence of length equal to the input rank, or a single number in which the sampling is assumed to be equal along all axes. This parameter is only used in the case of the euclidean distance transform.The

*distances*and*indices*arguments can be used to give optional output arrays that must be of the correct size and type (`np.float64`

and`np.int32`

).Note

This function uses a slow brute-force algorithm, the function

`distance_transform_cdt`

can be used to more efficiently calculate cityblock and chessboard distance transforms. The function`distance_transform_edt`

can be used to more efficiently calculate the exact euclidean distance transform.

## Segmentation and labeling¶

Segmentation is the process of separating objects of interest from
the background. The most simple approach is probably intensity
thresholding, which is easily done with `numpy`

functions:

```
>>> a = np.array([[1,2,2,1,1,0],
... [0,2,3,1,2,0],
... [1,1,1,3,3,2],
... [1,1,1,1,2,1]])
>>> np.where(a > 1, 1, 0)
array([[0, 1, 1, 0, 0, 0],
[0, 1, 1, 0, 1, 0],
[0, 0, 0, 1, 1, 1],
[0, 0, 0, 0, 1, 0]])
```

The result is a binary image, in which the individual objects still
need to be identified and labeled. The function `label`

generates an array where each object is assigned a unique number:

The

`label`

function generates an array where the objects in the input are labeled with an integer index. It returns a tuple consisting of the array of object labels and the number of objects found, unless the*output*parameter is given, in which case only the number of objects is returned. The connectivity of the objects is defined by a structuring element. For instance, in two dimensions using a four-connected structuring element gives:>>> a = np.array([[0,1,1,0,0,0],[0,1,1,0,1,0],[0,0,0,1,1,1],[0,0,0,0,1,0]]) >>> s = [[0, 1, 0], [1,1,1], [0,1,0]] >>> from scipy.ndimage import label >>> label(a, s) (array([[0, 1, 1, 0, 0, 0], [0, 1, 1, 0, 2, 0], [0, 0, 0, 2, 2, 2], [0, 0, 0, 0, 2, 0]]), 2)

These two objects are not connected because there is no way in which we can place the structuring element such that it overlaps with both objects. However, an 8-connected structuring element results in only a single object:

>>> a = np.array([[0,1,1,0,0,0],[0,1,1,0,1,0],[0,0,0,1,1,1],[0,0,0,0,1,0]]) >>> s = [[1,1,1], [1,1,1], [1,1,1]] >>> label(a, s)[0] array([[0, 1, 1, 0, 0, 0], [0, 1, 1, 0, 1, 0], [0, 0, 0, 1, 1, 1], [0, 0, 0, 0, 1, 0]])

If no structuring element is provided, one is generated by calling

`generate_binary_structure`

(see Binary morphology) using a connectivity of one (which in 2D is the 4-connected structure of the first example). The input can be of any type, any value not equal to zero is taken to be part of an object. This is useful if you need to ‘re-label’ an array of object indices, for instance after removing unwanted objects. Just apply the label function again to the index array. For instance:>>> l, n = label([1, 0, 1, 0, 1]) >>> l array([1, 0, 2, 0, 3]) >>> l = np.where(l != 2, l, 0) >>> l array([1, 0, 0, 0, 3]) >>> label(l)[0] array([1, 0, 0, 0, 2])

Note

The structuring element used by

`label`

is assumed to be symmetric.

There is a large number of other approaches for segmentation, for
instance from an estimation of the borders of the objects that can be
obtained for instance by derivative filters. One such an approach is
watershed segmentation. The function `watershed_ift`

generates
an array where each object is assigned a unique label, from an array
that localizes the object borders, generated for instance by a
gradient magnitude filter. It uses an array containing initial markers
for the objects:

The

`watershed_ift`

function applies a watershed from markers algorithm, using an Iterative Forest Transform, as described in [4].The inputs of this function are the array to which the transform is applied, and an array of markers that designate the objects by a unique label, where any non-zero value is a marker. For instance:

>>> input = np.array([[0, 0, 0, 0, 0, 0, 0], ... [0, 1, 1, 1, 1, 1, 0], ... [0, 1, 0, 0, 0, 1, 0], ... [0, 1, 0, 0, 0, 1, 0], ... [0, 1, 0, 0, 0, 1, 0], ... [0, 1, 1, 1, 1, 1, 0], ... [0, 0, 0, 0, 0, 0, 0]], np.uint8) >>> markers = np.array([[1, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 2, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0]], np.int8) >>> from scipy.ndimage import watershed_ift >>> watershed_ift(input, markers) array([[1, 1, 1, 1, 1, 1, 1], [1, 1, 2, 2, 2, 1, 1], [1, 2, 2, 2, 2, 2, 1], [1, 2, 2, 2, 2, 2, 1], [1, 2, 2, 2, 2, 2, 1], [1, 1, 2, 2, 2, 1, 1], [1, 1, 1, 1, 1, 1, 1]], dtype=int8)

Here two markers were used to designate an object (

*marker*= 2) and the background (*marker*= 1). The order in which these are processed is arbitrary: moving the marker for the background to the lower right corner of the array yields a different result:>>> markers = np.array([[0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 2, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 1]], np.int8) >>> watershed_ift(input, markers) array([[1, 1, 1, 1, 1, 1, 1], [1, 1, 1, 1, 1, 1, 1], [1, 1, 2, 2, 2, 1, 1], [1, 1, 2, 2, 2, 1, 1], [1, 1, 2, 2, 2, 1, 1], [1, 1, 1, 1, 1, 1, 1], [1, 1, 1, 1, 1, 1, 1]], dtype=int8)

The result is that the object (

*marker*= 2) is smaller because the second marker was processed earlier. This may not be the desired effect if the first marker was supposed to designate a background object. Therefore`watershed_ift`

treats markers with a negative value explicitly as background markers and processes them after the normal markers. For instance, replacing the first marker by a negative marker gives a result similar to the first example:>>> markers = np.array([[0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 2, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, 0], ... [0, 0, 0, 0, 0, 0, -1]], np.int8) >>> watershed_ift(input, markers) array([[-1, -1, -1, -1, -1, -1, -1], [-1, -1, 2, 2, 2, -1, -1], [-1, 2, 2, 2, 2, 2, -1], [-1, 2, 2, 2, 2, 2, -1], [-1, 2, 2, 2, 2, 2, -1], [-1, -1, 2, 2, 2, -1, -1], [-1, -1, -1, -1, -1, -1, -1]], dtype=int8)

The connectivity of the objects is defined by a structuring element. If no structuring element is provided, one is generated by calling

`generate_binary_structure`

(see Binary morphology) using a connectivity of one (which in 2D is a 4-connected structure.) For example, using an 8-connected structure with the last example yields a different object:>>> watershed_ift(input, markers, ... structure = [[1,1,1], [1,1,1], [1,1,1]]) array([[-1, -1, -1, -1, -1, -1, -1], [-1, 2, 2, 2, 2, 2, -1], [-1, 2, 2, 2, 2, 2, -1], [-1, 2, 2, 2, 2, 2, -1], [-1, 2, 2, 2, 2, 2, -1], [-1, 2, 2, 2, 2, 2, -1], [-1, -1, -1, -1, -1, -1, -1]], dtype=int8)

Note

The implementation of

`watershed_ift`

limits the data types of the input to`np.uint8`

and`np.uint16`

.

## Object measurements¶

Given an array of labeled objects, the properties of the individual
objects can be measured. The `find_objects`

function can be used
to generate a list of slices that for each object, give the
smallest sub-array that fully contains the object:

The

`find_objects`

function finds all objects in a labeled array and returns a list of slices that correspond to the smallest regions in the array that contains the object.For instance:

>>> a = np.array([[0,1,1,0,0,0],[0,1,1,0,1,0],[0,0,0,1,1,1],[0,0,0,0,1,0]]) >>> l, n = label(a) >>> from scipy.ndimage import find_objects >>> f = find_objects(l) >>> a[f[0]] array([[1, 1], [1, 1]]) >>> a[f[1]] array([[0, 1, 0], [1, 1, 1], [0, 1, 0]])

The function

`find_objects`

returns slices for all objects, unless the*max_label*parameter is larger then zero, in which case only the first*max_label*objects are returned. If an index is missing in the*label*array,`None`

is return instead of a slice. For example:>>> from scipy.ndimage import find_objects >>> find_objects([1, 0, 3, 4], max_label = 3) [(slice(0, 1, None),), None, (slice(2, 3, None),)]

The list of slices generated by `find_objects`

is useful to find
the position and dimensions of the objects in the array, but can also
be used to perform measurements on the individual objects. Say we want
to find the sum of the intensities of an object in image:

```
>>> image = np.arange(4 * 6).reshape(4, 6)
>>> mask = np.array([[0,1,1,0,0,0],[0,1,1,0,1,0],[0,0,0,1,1,1],[0,0,0,0,1,0]])
>>> labels = label(mask)[0]
>>> slices = find_objects(labels)
```

Then we can calculate the sum of the elements in the second object:

```
>>> np.where(labels[slices[1]] == 2, image[slices[1]], 0).sum()
80
```

That is however not particularly efficient, and may also be more complicated for other types of measurements. Therefore a few measurements functions are defined that accept the array of object labels and the index of the object to be measured. For instance calculating the sum of the intensities can be done by:

```
>>> from scipy.ndimage import sum as ndi_sum
>>> ndi_sum(image, labels, 2)
80
```

For large arrays and small objects it is more efficient to call the measurement functions after slicing the array:

```
>>> ndi_sum(image[slices[1]], labels[slices[1]], 2)
80
```

Alternatively, we can do the measurements for a number of labels with a single function call, returning a list of results. For instance, to measure the sum of the values of the background and the second object in our example we give a list of labels:

```
>>> ndi_sum(image, labels, [0, 2])
array([178.0, 80.0])
```

The measurement functions described below all support the *index*
parameter to indicate which object(s) should be measured. The default
value of *index* is None. This indicates that all elements where the
label is larger than zero should be treated as a single object and
measured. Thus, in this case the *labels* array is treated as a mask
defined by the elements that are larger than zero. If *index* is a
number or a sequence of numbers it gives the labels of the objects
that are measured. If *index* is a sequence, a list of the results is
returned. Functions that return more than one result, return their
result as a tuple if *index* is a single number, or as a tuple of
lists, if *index* is a sequence.

- The
`sum`

function calculates the sum of the elements of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. - The
`mean`

function calculates the mean of the elements of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. - The
`variance`

function calculates the variance of the elements of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. - The
`standard_deviation`

function calculates the standard deviation of the elements of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. - The
`minimum`

function calculates the minimum of the elements of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. - The
`maximum`

function calculates the maximum of the elements of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. - The
`minimum_position`

function calculates the position of the minimum of the elements of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. - The
`maximum_position`

function calculates the position of the maximum of the elements of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. - The
`extrema`

function calculates the minimum, the maximum, and their positions, of the elements of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. The result is a tuple giving the minimum, the maximum, the position of the minimum and the position of the maximum. The result is the same as a tuple formed by the results of the functions*minimum*,*maximum*,*minimum_position*, and*maximum_position*that are described above. - The
`center_of_mass`

function calculates the center of mass of the of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. - The
`histogram`

function calculates a histogram of the of the object with label(s) given by*index*, using the*labels*array for the object labels. If*index*is`None`

, all elements with a non-zero label value are treated as a single object. If*label*is`None`

, all elements of*input*are used in the calculation. Histograms are defined by their minimum (*min*), maximum (*max*) and the number of bins (*bins*). They are returned as one-dimensional arrays of type`np.int32`

.

## Extending `scipy.ndimage`

in C¶

A few functions in `scipy.ndimage`

take a callback argument. This
can be either a python function or a `scipy.LowLevelCallable`

containing a
pointer to a C function. Using a C function will generally be more
efficient since it avoids the overhead of calling a python function on
many elements of an array. To use a C function you must write a C
extension that contains the callback function and a Python function
that returns a `scipy.LowLevelCallable`

containing a pointer to the
callback.

An example of a function that supports callbacks is
`geometric_transform`

, which accepts a callback function that
defines a mapping from all output coordinates to corresponding
coordinates in the input array. Consider the following python example
which uses `geometric_transform`

to implement a shift function.

```
from scipy import ndimage
def transform(output_coordinates, shift):
input_coordinates = output_coordinates[0] - shift, output_coordinates[1] - shift
return input_coordinates
im = np.arange(12).reshape(4, 3).astype(np.float64)
shift = 0.5
print(ndimage.geometric_transform(im, transform, extra_arguments=(shift,)))
```

We can also implement the callback function with the following C code.

```
/* example.c */
#include <Python.h>
#include <numpy/npy_common.h>
static int
_transform(npy_intp *output_coordinates, double *input_coordinates,
int output_rank, int input_rank, void *user_data)
{
npy_intp i;
double shift = *(double *)user_data;
for (i = 0; i < input_rank; i++) {
input_coordinates[i] = output_coordinates[i] - shift;
}
return 1;
}
static char *transform_signature = "int (npy_intp *, double *, int, int, void *)";
static PyObject *
py_get_transform(PyObject *obj, PyObject *args)
{
if (!PyArg_ParseTuple(args, "")) return NULL;
return PyCapsule_New(_transform, transform_signature, NULL);
}
static PyMethodDef ExampleMethods[] = {
{"get_transform", (PyCFunction)py_get_transform, METH_VARARGS, ""},
{NULL, NULL, 0, NULL}
};
/* Initialize the module */
#if PY_VERSION_HEX >= 0x03000000
static struct PyModuleDef example = {
PyModuleDef_HEAD_INIT,
"example",
NULL,
-1,
ExampleMethods,
NULL,
NULL,
NULL,
NULL
};
PyMODINIT_FUNC
PyInit_example(void)
{
return PyModule_Create(&example);
}
#else
PyMODINIT_FUNC
initexample(void)
{
Py_InitModule("example", ExampleMethods);
}
#endif
```

More information on writing Python extension modules can be found
here. If the C code is in the file `example.c`

, then it can be
compiled with the following `setup.py`

,

```
from distutils.core import setup, Extension
import numpy
shift = Extension('example',
['example.c'],
include_dirs=[numpy.get_include()]
)
setup(name='example',
ext_modules=[shift]
)
```

and now running the script

```
import ctypes
import numpy as np
from scipy import ndimage, LowLevelCallable
from example import get_transform
shift = 0.5
user_data = ctypes.c_double(shift)
ptr = ctypes.cast(ctypes.pointer(user_data), ctypes.c_void_p)
callback = LowLevelCallable(transform(), ptr)
im = np.arange(12).reshape(4, 3).astype(np.float64)
print(ndimage.geometric_transform(im, callback))
```

produces the same result as the original python script.

In the C version `_transform`

is the callback function and the
parameters `output_coordinates`

and `input_coordinates`

play the
same role as they do in the python version while `output_rank`

and
`input_rank`

provide the equivalents of `len(output_coordinates)`

and `len(input_coordinates)`

. The variable `shift`

is passed
through `user_data`

instead of
`extra_arguments`

. Finally, the C callback function returns an integer
status which is one upon success and zero otherwise.

The function `py_transform`

wraps the callback function in a
`PyCapsule`

. The main steps are:

Initialize a

`PyCapsule`

. The first argument is a pointer to the callback function.The second argument is the function signature which must match exactly the one expected by

`ndimage`

.Above, we used

`scipy.LowLevelCallable`

to specify`user_data`

that we generated with`ctypes`

.A different approach would be to supply the data in the capsule context, that can be set by :cfunc:`PyCapsule_SetContext` and omit specifying

`user_data`

in`scipy.LowLevelCallable`

. However, in this approach we would need to deal with allocation/freeing of the data — freeing the data after the capsule is destroyed can be done by specifying a non-NULL callback function in the third argument of :cfunc:`PyCapsule_New`.

C callback functions for `ndimage`

all follow this scheme. The
next section lists the `ndimage`

functions that accept a C
callback function and gives the prototype of the function.

See also

The functions that support low-level callback arguments are:

Below, we show alternative ways to write the code, using Cython, ctypes, or cffi instead of writing wrapper code in C.

Numba

Numba provides a way to write low-level functions easily in Python. We can write the above using Numba as:

```
# example.py
import numpy as np
import ctypes
from scipy import ndimage, LowLevelCallable
from numba import cfunc, types, carray
@cfunc(types.intc(types.CPointer(types.intp),
types.CPointer(types.double),
types.intc,
types.intc,
types.voidptr))
def transform(output_coordinates_ptr, input_coordinates_ptr,
output_rank, input_rank, user_data):
input_coordinates = carray(input_coordinates_ptr, (input_rank,))
output_coordinates = carray(output_coordinates_ptr, (output_rank,))
shift = carray(user_data, (1,), types.double)[0]
for i in range(input_rank):
input_coordinates[i] = output_coordinates[i] - shift
return 1
shift = 0.5
# Then call the function
user_data = ctypes.c_double(shift)
ptr = ctypes.cast(ctypes.pointer(user_data), ctypes.c_void_p)
callback = LowLevelCallable(transform.ctypes, ptr)
im = np.arange(12).reshape(4, 3).astype(np.float64)
print(ndimage.geometric_transform(im, callback))
```

Cython

Functionally the same code as above can be written in Cython with somewhat less boilerplate as follows.

```
# example.pyx
from numpy cimport npy_intp as intp
cdef api int transform(intp *output_coordinates, double *input_coordinates,
int output_rank, int input_rank, void *user_data):
cdef intp i
cdef double shift = (<double *>user_data)[0]
for i in range(input_rank):
input_coordinates[i] = output_coordinates[i] - shift
return 1
```

```
# script.py
import ctypes
import numpy as np
from scipy import ndimage, LowLevelCallable
import example
shift = 0.5
user_data = ctypes.c_double(shift)
ptr = ctypes.cast(ctypes.pointer(user_data), ctypes.c_void_p)
callback = LowLevelCallable.from_cython(example, "transform", ptr)
im = np.arange(12).reshape(4, 3).astype(np.float64)
print(ndimage.geometric_transform(im, callback))
```

cffi

With cffi, you can interface with a C function residing in a shared library (DLL). First, we need to write the shared library, which we do in C — this example is for Linux/OSX:

```
/*
example.c
Needs to be compiled with "gcc -std=c99 -shared -fPIC -o example.so example.c"
or similar
*/
#include <stdint.h>
int
_transform(intptr_t *output_coordinates, double *input_coordinates,
int output_rank, int input_rank, void *user_data)
{
int i;
double shift = *(double *)user_data;
for (i = 0; i < input_rank; i++) {
input_coordinates[i] = output_coordinates[i] - shift;
}
return 1;
}
```

The Python code calling the library is:

```
import os
import numpy as np
from scipy import ndimage, LowLevelCallable
import cffi
# Construct the FFI object, and copypaste the function declaration
ffi = cffi.FFI()
ffi.cdef("""
int _transform(intptr_t *output_coordinates, double *input_coordinates,
int output_rank, int input_rank, void *user_data);
""")
# Open library
lib = ffi.dlopen(os.path.abspath("example.so"))
# Do the function call
user_data = ffi.new('double *', 0.5)
callback = LowLevelCallable(lib._transform, user_data)
im = np.arange(12).reshape(4, 3).astype(np.float64)
print(ndimage.geometric_transform(im, callback))
```

You can find more information in the cffi documentation.

ctypes

With *ctypes*, the C code and the compilation of the so/DLL is as for
cffi above. The Python code is different:

```
# script.py
import os
import ctypes
import numpy as np
from scipy import ndimage, LowLevelCallable
lib = ctypes.CDLL(os.path.abspath('example.so'))
shift = 0.5
user_data = ctypes.c_double(shift)
ptr = ctypes.cast(ctypes.pointer(user_data), ctypes.c_void_p)
# Ctypes has no built-in intptr type, so override the signature
# instead of trying to get it via ctypes
callback = LowLevelCallable(lib._transform, ptr,
"int _transform(intptr_t *, double *, int, int, void *)")
# Perform the call
im = np.arange(12).reshape(4, 3).astype(np.float64)
print(ndimage.geometric_transform(im, callback))
```

You can find more information in the ctypes documentation.

## References¶

[1] | M. Unser, “Splines: A Perfect Fit for Signal and Image Processing,” IEEE Signal Processing Magazine, vol. 16, no. 6, pp. 22-38, November 1999. |

[2] | G. Borgefors, “Distance transformations in arbitrary dimensions.”, Computer Vision, Graphics, and Image Processing, 27:321-345, 1984. |

[3] | C. R. Maurer, Jr., R. Qi, and V. Raghavan, “A linear time algorithm for computing exact euclidean distance transforms of binary images in arbitrary dimensions. IEEE Trans. PAMI 25, 265-270, 2003. |

[4] | P. Felkel, R. Wegenkittl, and M. Bruckschwaiger, “Implementation and Complexity of the Watershed-from-Markers Algorithm Computed as a Minimal Cost Forest.”, Eurographics 2001, pp. C:26-35. |