scipy.signal.dfreqresp

scipy.signal.dfreqresp(system, w=None, n=10000, whole=False)

Calculate the frequency response of a discrete-time system.

Parameters

systeman instance of the dlti class or a tuple describing the system.

The following gives the number of elements in the tuple and the interpretation:

• 1 (instance of dlti)

• 2 (numerator, denominator, dt)

• 3 (zeros, poles, gain, dt)

• 4 (A, B, C, D, dt)

warray_like, optional

Array of frequencies (in radians/sample). Magnitude and phase data is calculated for every value in this array. If not given a reasonable set will be calculated.

nint, optional

Number of frequency points to compute if w is not given. The n frequencies are logarithmically spaced in an interval chosen to include the influence of the poles and zeros of the system.

wholebool, optional

Normally, if ‘w’ is not given, frequencies are computed from 0 to the Nyquist frequency, pi radians/sample (upper-half of unit-circle). If whole is True, compute frequencies from 0 to 2*pi radians/sample.

Returns

w1D ndarray

Frequency array [radians/sample]

H1D ndarray

Array of complex magnitude values

Notes

If (num, den) is passed in for system, coefficients for both the numerator and denominator should be specified in descending exponent order (e.g. z^2 + 3z + 5 would be represented as [1, 3, 5]).

New in version 0.18.0.

Examples

Generating the Nyquist plot of a transfer function

>>> from scipy import signal
>>> import matplotlib.pyplot as plt

Construct the transfer function \(H(z) = \frac{1}{z^2 + 2z + 3}\) with a sampling time of 0.05 seconds:

>>> sys = signal.TransferFunction([1], [1, 2, 3], dt=0.05)

>>> w, H = signal.dfreqresp(sys)

>>> plt.figure()
>>> plt.plot(H.real, H.imag, "b")
>>> plt.plot(H.real, -H.imag, "r")
>>> plt.show()

scipy.signal.dstep scipy.signal.dbode