Most of this roadmap is intended to provide a high-level view on what is most needed per SciPy submodule in terms of new functionality, bug fixes, etc. Besides important “business as usual” changes, it contains ideas for major new features - those are marked as such, and are expected to take significant dedicated effort. Things not mentioned in this roadmap are not necessarily unimportant or out of scope, however we (the SciPy developers) want to provide to our users and contributors a clear picture of where SciPy is going and where help is needed most.

Note

This is the detailed roadmap. A very high-level overview with only the most important ideas is SciPy Roadmap.

## General¶

This roadmap will be evolving together with SciPy. Updates can be submitted as pull requests. For large or disruptive changes you may want to discuss those first on the scipy-dev mailing list.

### API changes¶

In general, we want to evolve the API to remove known warts as much as possible, however as much as possible without breaking backwards compatibility.

Also, it should be made (even) more clear what is public and what is private in SciPy. Everything private should be named starting with an underscore as much as possible.

### Test coverage¶

Test coverage of code added in the last few years is quite good, and we aim for a high coverage for all new code that is added. However, there is still a significant amount of old code for which coverage is poor. Bringing that up to the current standard is probably not realistic, but we should plug the biggest holes.

Besides coverage there is also the issue of correctness - older code may have a few tests that provide decent statement coverage, but that doesn’t necessarily say much about whether the code does what it says on the box. Therefore code review of some parts of the code (stats, signal and ndimage in particular) is necessary.

### Documentation¶

The documentation is in good shape. Expanding of current docstrings and putting them in the standard NumPy format should continue, so the number of reST errors and glitches in the html docs decreases. Most modules also have a tutorial in the reference guide that is a good introduction, however there are a few missing or incomplete tutorials - this should be fixed.

### Benchmarks¶

The asv-based benchmark system is in reasonable shape. It is quite easy to add new benchmarks, however running the benchmarks is not very intuitive. Making this easier is a priority. In addition, we should run them in our CI (gh-8779 is an ongoing attempt at this).

### Use of Cython¶

Regarding Cython code:

• It’s not clear how much functionality can be Cythonized without making the .so files too large. This needs measuring.

• Cython’s old syntax for using NumPy arrays should be removed and replaced with Cython memoryviews.

### Windows build issues¶

SciPy critically relies on Fortran code. This is still problematic on Windows. There are currently only two options: using Intel Fortran, or using MSVC + gfortran. The former is expensive, while the latter works (it’s what we use for releases) but is quite hard to do correctly. For allowing contributors and end users to reliably build SciPy on Windows, using the Flang compiler looks like the best way forward long-term.

### Continuous integration¶

Continuous integration is in good shape, it currently covers the Windows, macOS and Linux, ARM64 and ppc64le platforms, as well as a range of versions of our dependencies and building release quality wheels.

### Size of binaries¶

SciPy binaries are quite large (e.g. an unzipped manylinux wheel for 1.4.1 is 91 MB), and this can be problematic - for example for use in AWS Lambda, which has a 250 MB size limit. We aim to keep binary size as low as possible; when adding new compiled extensions, this needs checking. Stripping of debug symbols in multibuild can likely be improved (see this issue).

## Modules¶

### cluster¶

This module is in good shape.

### constants¶

This module is basically done, low-maintenance and without open issues.

### fft¶

This module is in good shape.

### integrate¶

Needed for ODE solvers:

• Documentation is pretty bad, needs fixing

• A new ODE solver interface (solve_ivp) was added in SciPy 1.0.0. In the future we can consider (soft-)deprecating the older API.

The numerical integration functions are in good shape. Support for integrating complex-valued functions and integrating multiple intervals (see gh-3325) could be added.

### interpolate¶

Ideas for new features:

• Spline fitting routines with better user control.

• Transparent tensor-product splines.

• NURBS support.

• Mesh refinement and coarsening of B-splines and corresponding tensor products.

### io¶

wavfile:

• PCM float will be supported, for anything else use audiolab or other specialized libraries.

• Raise errors instead of warnings if data not understood.

Other sub-modules (matlab, netcdf, idl, harwell-boeing, arff, matrix market) are in good shape.

### linalg¶

scipy.linalg is in good shape.

Needed:

• Reduce duplication of functions with numpy.linalg, make APIs consistent.

• get_lapack_funcs should always use flapack

• Wrap more LAPACK functions

• One too many funcs for LU decomposition, remove one

Ideas for new features:

• Add type-generic wrappers in the Cython BLAS and LAPACK

• Make many of the linear algebra routines into gufuncs

BLAS and LAPACK

The Python and Cython interfaces to BLAS and LAPACK in scipy.linalg are one of the most important things that SciPy provides. In general scipy.linalg is in good shape, however we can make a number of improvements:

1. Library support. Our released wheels now ship with OpenBLAS, which is currently the only feasible performant option (ATLAS is too slow, MKL cannot be the default due to licensing issues, Accelerate support is dropped because Apple doesn’t update Accelerate anymore). OpenBLAS isn’t very stable though, sometimes its releases break things and it has issues with threading (currently the only issue for using SciPy with PyPy3). We need at the very least better support for debugging OpenBLAS issues, and better documentation on how to build SciPy with it. An option is to use BLIS for a BLAS interface (see numpy gh-7372).

2. Support for newer LAPACK features. In SciPy 1.2.0 we increased the minimum supported version of LAPACK to 3.4.0. Now that we dropped Python 2.7, we can increase that version further (MKL + Python 2.7 was the blocker for >3.4.0 previously) and start adding support for new features in LAPACK.

### misc¶

scipy.misc will be removed as a public module. Most functions in it have been moved to another submodule or deprecated. The few that are left:

• info, who : these are NumPy functions

• derivative, central_diff_weight : remove, possibly replacing them with more extensive functionality for numerical differentiation.

### ndimage¶

Underlying ndimage is a powerful interpolation engine. Users come with an expectation of one of two models: a pixel model with (1, 1) elements having centers (0.5, 0.5), or a data point model, where values are defined at points on a grid. Over time, we’ve become convinced that the data point model is better defined and easier to implement, but this should be clearly communicated in the documentation.

More importantly, still, SciPy implements one variant of this data point model, where datapoints at any two extremes of an axis share a spatial location under periodic wrapping mode. E.g., in a 1D array, you would have x[0] and x[-1] co-located. A very common use-case, however, is for signals to be periodic, with equal spacing between the first and last element along an axis (instead of zero spacing). Wrapping modes for this use-case were added in gh-8537, next the interpolation routines should be updated to use those modes. This should address several issues, including gh-1323, gh-1903, gh-2045 and gh-2640.

The morphology interface needs to be standardized:

• binary dilation/erosion/opening/closing take a “structure” argument, whereas their grey equivalent take size (has to be a tuple, not a scalar), footprint, or structure.

• a scalar should be acceptable for size, equivalent to providing that same value for each axis.

• for binary dilation/erosion/opening/closing, the structuring element is optional, whereas it’s mandatory for grey. Grey morphology operations should get the same default.

• other filters should also take that default value where possible.

### odr¶

This module is in reasonable shape, although it could use a bit more maintenance. No major plans or wishes here.

### optimize¶

Overall this module is in good shape. Two good global optimizers were added in 1.2.0; large-scale optimizers is still a gap that could be filled. Other things that are needed:

• Many ideas for additional functionality (e.g. integer constraints, sparse matrix support, performance improvements) in linprog, see gh-9269.

• Add functionality to the benchmark suite to compare results more easily (e.g. with summary plots).

• deprecate the fmin_* functions in the documentation, minimize is preferred.

• scipy.optimize has an extensive set of benchmarks for accuracy and speed of the global optimizers. That has allowed adding new optimizers (shgo and dual_annealing) with significantly better performance than the existing ones. The optimize benchmark system itself is slow and hard to use however; we need to make it faster and make it easier to compare performance of optimizers via plotting performance profiles.

### signal¶

Convolution and correlation: (Relevant functions are convolve, correlate, fftconvolve, convolve2d, correlate2d, and sepfir2d.) Eliminate the overlap with ndimage (and elsewhere). From numpy, scipy.signal and scipy.ndimage (and anywhere else we find them), pick the “best of class” for 1-D, 2-D and n-d convolution and correlation, put the implementation somewhere, and use that consistently throughout SciPy.

B-splines: (Relevant functions are bspline, cubic, quadratic, gauss_spline, cspline1d, qspline1d, cspline2d, qspline2d, cspline1d_eval, and spline_filter.) Move the good stuff to interpolate (with appropriate API changes to match how things are done in interpolate), and eliminate any duplication.

Filter design: merge firwin and firwin2 so firwin2 can be removed.

Continuous-Time Linear Systems: remove lsim2, impulse2, step2. The lsim, impulse and step functions now “just work” for any input system. Further improve the performance of ltisys (fewer internal transformations between different representations). Fill gaps in lti system conversion functions.

Second Order Sections: Make SOS filtering equally capable as existing methods. This includes ltisys objects, an lfiltic equivalent, and numerically stable conversions to and from other filter representations. SOS filters could be considered as the default filtering method for ltisys objects, for their numerical stability.

Wavelets: what’s there now doesn’t make much sense. Continuous wavelets only at the moment - decide whether to completely rewrite or remove them. Discrete wavelet transforms are out of scope (PyWavelets does a good job for those).

### sparse¶

The sparse matrix formats are mostly feature-complete, however the main issue is that they act like numpy.matrix (which will be deprecated in NumPy at some point). What we want is sparse arrays, that act like numpy.ndarray. This is being worked on in https://github.com/pydata/sparse, which is quite far along. The tentative plan is:

• Start depending on pydata/sparse once it’s feature-complete enough (it still needs a CSC/CSR equivalent) and okay performance-wise.

• Add support for pydata/sparse to scipy.sparse.linalg (and perhaps to scipy.sparse.csgraph after that).

• Indicate in the documentation that for new code users should prefer pydata/sparse over sparse matrices.

• When NumPy deprecates numpy.matrix, vendor that or maintain it as a stand-alone package.

Regarding the different sparse matrix formats: there are a lot of them. These should be kept, but improvements/optimizations should go into CSR/CSC, which are the preferred formats. LIL may be the exception, it’s inherently inefficient. It could be dropped if DOK is extended to support all the operations LIL currently provides.

### sparse.csgraph¶

This module is in good shape.

### sparse.linalg¶

Arpack is in good shape.

isolve:

• callback keyword is inconsistent

• tol keyword is broken, should be relative tol

• Fortran code not re-entrant (but we don’t solve, maybe re-use from PyKrilov)

dsolve:

• add sparse Cholesky or incomplete Cholesky

• look at CHOLMOD

Ideas for new features:

• Wrappers for PROPACK for faster sparse SVD computation.

### spatial¶

QHull wrappers are in good shape, as is cKDTree.

Needed:

• KDTree will be removed, and cKDTree will be renamed to KDTree in a backwards-compatible way.

• distance_wrap.c needs to be cleaned up (maybe rewrite in Cython).

### special¶

Though there are still a lot of functions that need improvements in precision, probably the only show-stoppers are hypergeometric functions, parabolic cylinder functions, and spheroidal wave functions. Three possible ways to handle this:

1. Get good double-precision implementations. This is doable for parabolic cylinder functions (in progress). I think it’s possible for hypergeometric functions, though maybe not in time. For spheroidal wavefunctions this is not possible with current theory.

2. Port Boost’s arbitrary precision library and use it under the hood to get double precision accuracy. This might be necessary as a stopgap measure for hypergeometric functions; the idea of using arbitrary precision has been suggested before by @nmayorov and in gh-5349. Likely necessary for spheroidal wave functions, this could be reused: https://github.com/radelman/scattering.

3. Add clear warnings to the documentation about the limits of the existing implementations.

### stats¶

The scipy.stats subpackage aims to provide fundamental statistical methods as might be covered in standard statistics texts such as Johnson’s “Miller & Freund’s Probability and Statistics for Engineers”, Sokal & Rohlf’s “Biometry”, or Zar’s “Biostatistical Analysis”. It does not seek to duplicate the advanced functionality of downstream packages (e.g. StatsModels, LinearModels, PyMC3); instead, it can provide a solid foundation on which they can build. (Note that these are rough guidelines, not strict rules. “Advanced” is an ill-defined and subjective term, and “advanced” methods may also be included in SciPy, especially if no other widely used and well-supported package covers the topic. Also note that some duplication with downstream projects is inevitable and not necessarily a bad thing.)

The following improvements will help SciPy better serve this role.

• Add fundamental and widely used hypothesis tests:

• Alexander-Govern test

• Somers’ D

• Kendall’s tau-c

• Page’s L-test

• Tukey-Kramer test

• Dunnett’s test

• the various types of analysis of variance (ANOVA):

• two-way ANOVA (single replicate, uniform number of replicates, variable number of replicates)

• multiway ANOVA (i.e. generalize two-way ANOVA)

• nested ANOVA

• analysis of covariance (ANCOVA)

• Where appropriate, include confidence intervals for the statistic in the results of any statistical test.

• Enhance the fit method of the continuous probability distributions:

• Expand the options for fitting to include:

• method of moments

• maximal product spacings

• method of L-moments / probability weighted moments

• Include measures of goodness-of-fit in the results

• Handle censored data

• Implement additional widely used continuous and discrete probability distributions:

• noncentral hypergeometric distribution (both Fisher’s and Wallenius’)

• negative hypergeometric distribution

• multivariate hypergeometric distribution

• multivariate t distribution

• mixture distributions

• Improve the core calculations provided by SciPy’s probability distributions so they can robustly handle wide ranges of parameter values. Specifically, replace many of the PDF and CDF methods from the Fortran library CDFLIB used in scipy.special with better code, perhaps ported from the Boost C++ library.

• Continue work on making the function signatures of stats and stats.mstats more consistent, and add tests to ensure that that remains the case.

• Return Bunch objects from functions that now return many values, and for functions for which extra return values are desired (see gh-3665).

• Improve statistical tests (p-value calculation, alternative hypothesis), for example implement an exact two-sided KS test (see gh-8341) or a one-sided Wilcoxon test (see gh-9046).

• Address the various issues regarding stats.mannwhitneyu, and pick up the stalled PR in gh-4933.