scipy.signal.ellipord

scipy.signal.ellipord(wp, ws, gpass, gstop, analog=0)

Elliptic (Cauer) filter order selection.

Return the order of the lowest order digital elliptic filter that loses no more than gpass dB in the passband and has at least gstop dB attenuation in the stopband.

Parameters :

wp, ws – Passband and stopband edge frequencies, normalized from 0 :

to 1 (1 corresponds to pi radians / sample). For example:

Lowpass: wp = 0.2, ws = 0.3 Highpass: wp = 0.3, ws = 0.2 Bandpass: wp = [0.2, 0.5], ws = [0.1, 0.6] Bandstop: wp = [0.1, 0.6], ws = [0.2, 0.5]

gpass – The maximum loss in the passband (dB). :

gstop – The minimum attenuation in the stopband (dB). :

analog – Non-zero to design an analog filter (in this case wp and :

ws are in radians / second).

Returns :

ord – The lowest order for an Elliptic (Cauer) filter that meets specs. :

Wn – The natural frequency for use with scipy.signal.ellip :

to give the filter.

Previous topic

scipy.signal.ellip

Next topic

scipy.signal.bessel

This Page